# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# Process this file with automake to generate a GNU Makefile

########################################################################
# put file lists and special compile rules here


SHELL = /bin/sh

srcdir = .
top_srcdir = .

prefix = /usr
exec_prefix = ${prefix}

bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = /etc
sharedstatedir = ${prefix}/com
localstatedir = /var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/libgphoto2
pkglibdir = $(libdir)/libgphoto2
pkgincludedir = $(includedir)/libgphoto2

top_builddir = .

ACLOCAL = /tmp/libgphoto2-2.1.6/missing aclocal-1.4
AUTOCONF = autoconf
AUTOMAKE = /tmp/libgphoto2-2.1.6/missing automake-1.4
AUTOHEADER = autoheader

INSTALL = /usr/bin/ginstall -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL}
transform = s,x,x,

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = powerpc-slackware-linux
host_triplet = powerpc-slackware-linux-gnu
AR = ar
AS = @AS@
BUILD_INCLUDED_LIBINTL = no
CATOBJEXT = .gmo
CC = powerpc-slackware-linux-gcc
CPP = powerpc-slackware-linux-gcc -E
CXX = powerpc-slackware-linux-g++
CXXCPP = powerpc-slackware-linux-g++ -E
DATADIRNAME = share
DLLTOOL = @DLLTOOL@
ECHO = echo
EGREP = grep -E
EXEEXT = 
EXIF_CFLAGS = -I/usr/include/libexif  
EXIF_LIBS = -lexif -lm  
F77 = g77
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GENCAT = gencat
GETTEXT_PACKAGE = libgphoto2-2
GLIBC2 = yes
GLIBC21 = yes
GMSGFMT = /usr/bin/msgfmt
GTKDOC = 
HAVE_ASPRINTF = 1
HAVE_LIB = @HAVE_LIB@
HAVE_POSIX_PRINTF = 1
HAVE_SNPRINTF = 1
HAVE_WPRINTF = 0
INSTOBJEXT = .mo
INTLBISON = bison
INTLLIBS = 
INTLOBJS = 
INTL_LIBTOOL_SUFFIX_PREFIX = 
INTL_MACOSX_LIBS = 
LIB = @LIB@
LIBGPHOTO2_AGE = 3
LIBGPHOTO2_CURRENT = 2
LIBGPHOTO2_REVISION = 0
LIBGPHOTO2_VERSION_INFO = 2:3:0
LIBICONV = 
LIBINTL = 
LIBJPEG = -ljpeg
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBUSB_CONFIG = /usr/bin/libusb-config
LN_S = ln -s
LTDL_LIBS = -ldl
LTLIB = @LTLIB@
LTLIBICONV = 
LTLIBINTL = 
MAINT = #
MAKEINFO = makeinfo
MKINSTALLDIRS = $(top_builddir)/./mkinstalldirs
OBJDUMP = @OBJDUMP@
OBJEXT = o
PACKAGE = libgphoto2
PKG_CONFIG = /usr/bin/pkg-config
POSUB = po
RANLIB = ranlib
RC = @RC@
RPMBUILD = rpmbuild
STRIP = strip
SUBDIRS_CAMLIBS =  adc65 agfa-cl20 aox barbie canon casio digita dimera directory fuji gsmart300 iclick jamcam jd11 kodak konica largan mars minolta mustek panasonic pccam300 pccam600 polaroid ptp2 ricoh samsung sierra sipix smal sonydscf1 sonydscf55 soundvision spca50x sq905 stv0674 stv0680 sx330z toshiba enigma13
USE_INCLUDED_LIBINTL = no
USE_NLS = yes
VERSION = 2.1.6
apidocdir = /usr/doc/libgphoto2-2.1.6/html/api
camlibdir = ${libdir}/gphoto2/${VERSION}
docdir = /usr/doc/libgphoto2-2.1.6
effective_target = powerpc-slackware-linux
hotplugdocdir = /usr/doc/libgphoto2-2.1.6/linux-hotplug
hotplugusermapdir = /etc/hotplug/usb
htmldir = /usr/doc/libgphoto2-2.1.6/html
pkgconfigdir = ${libdir}/pkgconfig

bin_SCRIPTS = gphoto2-config

EXTRA_DIST = config.rpath mkinstalldirs  HACKING MAINTAINERS makefile.os2 os2mak.inc TESTERS CHANGES

SUBDIRS = intl libgphoto2_port libgphoto2 camlibs tests po packaging doc

doc_DATA = AUTHORS COPYING README CHANGES NEWS

########################################################################
# The following default options for aclocal and automake
# are required in the top level Makefile.am for the automatic 
# re-building of the build system files (only if configured with
# --enable-maintainer-mode). 
#
# It is not sufficient to have these options somewhere in autogen.sh!

ACLOCAL_AMFLAGS = -I libgphoto2_port/m4
AUTOMAKE_OPTIONS = gnu
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =  README gphoto2-config
SCRIPTS =  $(bin_SCRIPTS)

DATA =  $(doc_DATA)

DIST_COMMON =  README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
INSTALL Makefile.am Makefile.in NEWS README.in aclocal.m4 config.guess \
config.h.in config.sub configure configure.in gphoto2-config.in \
install-sh ltmain.sh missing mkinstalldirs


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: # Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

$(ACLOCAL_M4): # configure.in  \
		libgphoto2_port/m4/byteorder.m4 \
		libgphoto2_port/m4/codeset.m4 \
		libgphoto2_port/m4/documentation.m4 \
		libgphoto2_port/m4/gettext.m4 \
		libgphoto2_port/m4/glibc2.m4 \
		libgphoto2_port/m4/glibc21.m4 \
		libgphoto2_port/m4/iconv.m4 \
		libgphoto2_port/m4/intdiv0.m4 \
		libgphoto2_port/m4/intmax.m4 \
		libgphoto2_port/m4/inttypes-pri.m4 \
		libgphoto2_port/m4/inttypes.m4 \
		libgphoto2_port/m4/inttypes_h.m4 \
		libgphoto2_port/m4/isc-posix.m4 \
		libgphoto2_port/m4/lcmessage.m4 \
		libgphoto2_port/m4/lib-ld.m4 \
		libgphoto2_port/m4/lib-link.m4 \
		libgphoto2_port/m4/lib-prefix.m4 \
		libgphoto2_port/m4/longdouble.m4 \
		libgphoto2_port/m4/longlong.m4 \
		libgphoto2_port/m4/nls.m4 \
		libgphoto2_port/m4/packaging.m4 \
		libgphoto2_port/m4/po.m4 \
		libgphoto2_port/m4/printf-posix.m4 \
		libgphoto2_port/m4/progtest.m4 \
		libgphoto2_port/m4/references.m4 \
		libgphoto2_port/m4/signed.m4 \
		libgphoto2_port/m4/size_max.m4 \
		libgphoto2_port/m4/stdint.m4 \
		libgphoto2_port/m4/stdint_h.m4 \
		libgphoto2_port/m4/uintmax_t.m4 \
		libgphoto2_port/m4/ulonglong.m4 \
		libgphoto2_port/m4/wchar_t.m4 \
		libgphoto2_port/m4/wint_t.m4 \
		libgphoto2_port/m4/xsize.m4
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck
$(srcdir)/configure: #$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && $(AUTOCONF)

config.h: stamp-h
	@if test ! -f $@; then \
		rm -f stamp-h; \
		$(MAKE) stamp-h; \
	else :; fi
stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
	     $(SHELL) ./config.status
	@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.h.in: #$(srcdir)/stamp-h.in
	@if test ! -f $@; then \
		rm -f $(srcdir)/stamp-h.in; \
		$(MAKE) $(srcdir)/stamp-h.in; \
	else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOHEADER)
	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null

mostlyclean-hdr:

clean-hdr:

distclean-hdr:
	-rm -f config.h

maintainer-clean-hdr:
README: $(top_builddir)/config.status README.in
	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
gphoto2-config: $(top_builddir)/config.status gphoto2-config.in
	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(bindir)
	@list='$(bin_SCRIPTS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \
	    $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
	  else if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \
	    $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
	  else :; fi; fi; \
	done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	list='$(bin_SCRIPTS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
	done

install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(docdir)
	@list='$(doc_DATA)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docdir)/$$p"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(docdir)/$$p; \
	  else if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(docdir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(docdir)/$$p; \
	  fi; fi; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	list='$(doc_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(docdir)/$$p; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.



all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" != "." || dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP))

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --with-included-gettext --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am: install-binSCRIPTS
install-exec: install-exec-recursive

install-data-am: install-docDATA
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-binSCRIPTS uninstall-docDATA
uninstall: uninstall-recursive
all-am: Makefile $(SCRIPTS) $(DATA) config.h
all-redirect: all-recursive-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(docdir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
		maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
uninstall-binSCRIPTS install-binSCRIPTS uninstall-docDATA \
install-docDATA install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
install-exec-am install-exec install-data-am install-data install-am \
install uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# we use just ONE .PHONY target in order not to confuse automake

.PHONY: rpm cvs-tags source-code-check

########################################################################
# source code check maintenance task
#
#   This finds code patterns we don't want to have.
#
#   Use it to get rid of existing patterns and make sure they aren't
#   reintroduced later.
#
#   The output is meant to be read and interpreted by human programmers.

source-code-check:
	@echo "######## Finding // comments"
	find . -type f -name '*.[ch]' -exec egrep -H '(^//|[^:]//)' {} \;
	@echo "######## Finding remainders of Arnaud's comment replacement"
	find . -type f -name '*.[ch]' -exec egrep -H 'http:/\*' {} \;
	@echo "######## Finding explicit libintl.h references"
	find . -type f -name '*.[ch]' -exec egrep -H '^#.*include.*libintl\.h' {} \;

########################################################################
# The following rules are only interesting if you want to create
# distribution packages (as source tarballs or system specific packages)

# create RPM packages
rpm: Makefile
	$(MAKE) dist
	$(MAKE) -C packaging/rpm rpm
	@echo "The RPM packages should now be found in packaging/rpm/RPMS"

#rpm:
#	@echo "Dummy $@ target"

# add CVS tags - used only by the project maintainer to tag the files of a
# released version
#cvs-tags: Makefile
#	@echo cvs tag "libgphoto2-$$(echo '2.1.6' | sed -e 's/\./_/g' -e 's/rc/-rc/g')"

cvs-tags:
	@echo "Dummy $@ target"

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
