#!/bin/sh
dialog --title "Install packages from series AP (Applications)" \
       --checklist "Please select the packages you would like to install to your hard drive from the Slackware Professional CD-ROM.  The disc must be mounted under /cdrom for this to work. If you are upgrading a package that currently runs from your CD-ROM, you may wish to save any configuration files first. (they will be reset) Press ENTER when you are done." \
20 70 8 \
"jove" "Jonathan's Own Version of Emacs" "off" \
"man" "On-line manual pages" "off" \
"termbin" "Term 2.2.4" "off" \
"termnet" "Network utilities for term" "off" \
"termsrc" "Term 2.2.4 source code" "off" \
"diff" "GNU diffutils-2.7" "off" \
"ghostscr" "GNU Ghostscript version 2.6.1" "off" \
"gsfonts1" "Fonts for Ghostscript" "off" \
"jed" "John E. Davis's JED 0.96 editor" "off" \
"joe" "Joe text editor, 2.2" "off" \
"sudo" "sudo 1.2" "off" \
"gsfonts2" "More fonts for Ghostscript" "off" \
"zsh" "zsh version 2.4" "off" \
"ash" "Kenneth Almquist's ash shell" "off" \
"bc" "GNU bc 1.02" "off" \
"ftape" "ftape 1.13b" "off" \
"gp9600" "Reset your modem speed" "off" \
"groff" "GNU troff 1.09 formatting system" "off" \
"manpgs" "Man-pages 1.4" "off" \
"mt_st" "mt-st-0.1 - controls tape drives" "off" \
"quota" "Disk quota utilities" "off" \
"sc" "The 'sc' spreadsheet. (v. 6.21)" "off" \
"texinfo" "GNU texinfo-3.1" "off" \
"vim" "Version 3.0 of Vim: Vi IMproved" "off" \
"workbone" "Workbone 0.1" "off" \
"ispell" "ispell-3.1.08" "off" \
"jpeg" "JPEG Group's 5beta2 JPEG utils" "off" \
"mc" "MouseLess Commander version 0.14" "off" \
"shlbsvga" "Shared library libsvga.so.1.1.8 (fr" "off" \
2> /tmp/return
if fgrep '"jove"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package jove to your hard drive" --infobox \
"Jonathan's Own Version of Emacs (4.14.10) \n\
\n\
A mostly Emacs compatible text editor, with man pages and the \n\
'teachjove' tutorial program. If you'd rather have the real thing, \n\
the actual Emacs editor/environment is available as disk series 'E'.\n\
\n\
" 8 75
 installpkg ap1/jove.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"man"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package man to your hard drive" --infobox \
"On-line manual pages. \n\
\n\
These manual pages have been preprocessed with groff and then\n\
compressed with gzip to save you time and disk space.\n\
\n\
" 7 75
 installpkg ap1/man.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"termbin"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package termbin to your hard drive" --infobox \
"Term 2.2.4\n\
\n\
The executable files and man pages for term, which allows\n\
multiple shells and pseudo-TCP/IP over modem lines.\n\
\n\
" 7 75
 installpkg ap1/termbin.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"termnet"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package termnet to your hard drive" --infobox \
"Network utilities for term\n\
\n\
Includes these utilities, compiled to work through term 2.x.x:\n\
\n\
tncftp - version 1.8.3 of Mike Gleason's NcFTP for term.\n\
ttelnet - telnet for term.\n\
tfinger - finger users anywhere on the net.\n\
twhois - gather information about Internet domains.\n\
\n\
" 11 75
 installpkg ap1/termnet.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"termsrc"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package termsrc to your hard drive" --infobox \
"Term 2.2.4 source code\n\
\n\
SOURCE code for the TERM daemon which allows multiple sessions over a\n\
modem line to another Unix machine also running term. This source code\n\
is not needed to run term on your Linux machine, but you may have to\n\
upload this to your intended term host machine to compile. TERM\n\
has support for these operating systems:\n\
\n\
Linux, NetBSD, SunOS, ULTRIX, IRIX, NeXT, CX/UX, AIX, BSD386, sco386,\n\
vistra800, ptx, iris3d, iris4d, OSF1, m68k, ConvexOS, and HP-UX.\n\
\n\
" 13 75
 installpkg ap1/termsrc.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"diff"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package diff to your hard drive" --infobox \
"GNU diffutils-2.7\n\
\n\
The GNU diff utilities - finds differences between files. (to make\n\
source code patches, for instance)\n\
\n\
" 7 75
 installpkg ap2/diff.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"ghostscr"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package ghostscr to your hard drive" --infobox \
"GNU Ghostscript version 2.6.1 - (with fixes 01-04 applied).\n\
Preview, print and process PostScript documents on both PostScript and\n\
non-PostScript devices. This version supports all SVGAlib video modes\n\
for output directly to the screen. See the man page for 'gs' for more\n\
information. [NOTE]: The /usr/bin/gs binary included with this package\n\
does not support X11; support was left out so that Slackware users \n\
without X could use SVGAlib output and not need to install the X \n\
shared libraries. If you need X11 support, you should also install the\n\
package 'gs_x11' found on the XAP series. It contains a /usr/bin/gs\n\
with support for X11 (as well as full SVGAlib support).\n\
\n\
" 13 75
 installpkg ap2/ghostscr.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"gsfonts1"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package gsfonts1 to your hard drive" --infobox \
"Fonts for the Ghostscript interpreter/previewer.\n\
\n\
" 4 75
 installpkg ap2/gsfonts1.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"jed"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package jed to your hard drive" --infobox \
"John E. Davis's JED 0.96 editor.\n\
\n\
JED is an extremely powerful but small emacs programmer's editor that\n\
is extensible in a C-like macro language and is able to perform color\n\
syntax highlighting. Among the many features:\n\
Emacs, wordstar, EDT emulation;\n\
C, Fortran, TeX, text editing modes;  Full undo;\n\
GNU Emacs compatible info reader, and lots more.\n\
\n\
8 bit clean, so you can even edit binary files!  \n\
\n\
" 13 75
 installpkg ap2/jed.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"joe"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package joe to your hard drive" --infobox \
"Joe text editor, 2.2.\n\
\n\
Joseph H. Allen's easy to use text editor, similar to WordStar[tm].\n\
\n\
" 6 75
 installpkg ap2/joe.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"sudo"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package sudo to your hard drive" --infobox \
"sudo 1.2\n\
\n\
'sudo' is a command that allows users to execute some commands as \n\
root. The /etc/sudoers file (edited with 'visudo') specifies which\n\
users have access to sudo and which commands they can run. 'sudo' logs\n\
all its activities to /var/adm/sudo, so the system administrator can\n\
can keep an eye on things.\n\
\n\
" 10 75
 installpkg ap2/sudo.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"gsfonts2"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package gsfonts2 to your hard drive" --infobox \
"More fonts for the Ghostscript interpreter/previewer.\n\
\n\
" 4 75
 installpkg ap3/gsfonts2.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"zsh"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package zsh to your hard drive" --infobox \
"zsh version 2.4\n\
\n\
Zsh is a UNIX command interpreter (shell) which of the standard shells\n\
most resembles the Korn shell (ksh), although it is not completely\n\
compatible.  It includes enhancements of many types, notably in the\n\
command-line editor, options for customizing its behavior, filename\n\
globbing, features to make C-shell (csh) users feel more at home and\n\
extra features drawn from tcsh (another 'custom' shell).  Zsh was \n\
written by Paul Falstad.\n\
\n\
" 12 75
 installpkg ap3/zsh.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"ash"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package ash to your hard drive" --infobox \
"Kenneth Almquist's ash shell.\n\
\n\
A lightweight (62K) Bourne compatible shell. Great for machines with\n\
low memory, but does not provide all the extras of shells like bash,\n\
tcsh, and zsh. Runs most shell scripts compatible with the Bourne\n\
shell. Note that under Linux, most scripts seem to use at least some\n\
bash-specific syntax. The Slackware setup scripts are a notable\n\
exception, since ash is the shell used on the install disks. NetBSD\n\
uses ash as its /bin/sh.\n\
\n\
" 12 75
 installpkg ap4/ash.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"bc"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package bc to your hard drive" --infobox \
"GNU bc 1.02 - An arbitrary precision calculator language.\n\
bc is a language that supports arbitrary precision numbers with \n\
interactive execution of statements.  There are some similarities in\n\
the syntax to the C programming language.\n\
" 6 75
 installpkg ap4/bc.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"ftape"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package ftape to your hard drive" --infobox \
"ftape 1.13b\n\
\n\
Bas Laarhoven's FTAPE module.\n\
\n\
The FTAPE driver allows you to use a QIC-40 or QIC-80 floppy tape\n\
drive with Linux.\n\
\n\
This module will only work with Linux version: 1.1.59\n\
\n\
" 11 75
 installpkg ap4/ftape.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"gp9600"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package gp9600 to your hard drive" --infobox \
"This is a script that allows you to set your modem speed. If you do\n\
not install this script, your baud rate will be set to 9600. If you\n\
install it, a menu will be presented later on allowing you to select\n\
any of the following baud rates:\n\
\n\
300, 1200, 2400, 4800, 9600, 19200, 38400.\n\
\n\
If you need something faster than this, you should set the baud to\n\
38400, which can be changed to mean a faster rate with setserial.\n\
\n\
" 12 75
 installpkg ap4/gp9600.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"groff"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package groff to your hard drive" --infobox \
"GNU troff 1.09 document formatting system.\n\
\n\
The groff package provides versions of troff, nroff, eqn, tbl, and \n\
other Unix text-formatting utilities. Groff is used to 'compile' man\n\
pages stored in groff/nroff format into a form which can be printed or\n\
displayed on the screen. These man pages would be in /usr/man/man?. \n\
Most of the man pages in the Slackware Linux distribution (except in\n\
the groff package) have been preformatted, GNU zipped, and placed in \n\
the /usr/man/preformat/cat? directories. Groff is not needed to view\n\
preformatted man pages.                                 \n\
\n\
" 13 75
 installpkg ap4/groff.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"manpgs"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package manpgs to your hard drive" --infobox \
"Man-pages 1.4\n\
\n\
Assorted man pages that go in sections 1, 4, 5, 6, 7, 8, and 9.\n\
\n\
Contributors to man-pages 1.4 include:  \n\
Alan Cox, Dan Miner, Daniel Quinlan, Darren Senn, David Metcalfe,\n\
Drew Eckhardt, Giorgio Ciucci, Graeme W. Wilford, Ian Jackson, \n\
Jens Schweikhardt, Luigi P. Bai, Michael Edward Chastain, \n\
Michael Haardt, Mitchum DSouza, Rik Faith, Steven Greenland, \n\
and Thomas Koenig.\n\
\n\
" 13 75
 installpkg ap4/manpgs.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"mt_st"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package mt_st to your hard drive" --infobox \
"mt-st-0.1 - controls magnetic tape drive operation\n\
\n\
This mt originates from BSD NET-2. Some Linux SCSI tape-specific\n\
ioctls have been added to the original source and the man page has\n\
been updated. Although this mt program is tailored for SCSI tape, it\n\
can also be used with the QIC-02 driver and hopefully with other Linux\n\
tape drivers using the same ioctls (some of the commands may not work\n\
with all drivers).\n\
\n\
" 11 75
 installpkg ap4/mt_st.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"quota"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package quota to your hard drive" --infobox \
"Disk quota utilities.\n\
\n\
Disk quota utilities, written by Marco van Wieringen, Edvard Tuinder,\n\
and Linus Torvalds.  The required kernel patches are built into some\n\
of the kernels and source provided with Slackware, and the patches can\n\
be found in the ./kernel-source/v1.1 directory of the Slackware source\n\
tree.\n\
\n\
" 10 75
 installpkg ap4/quota.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"sc"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package sc to your hard drive" --infobox \
"The 'sc' spreadsheet. (v. 6.21)\n\
" 3 75
 installpkg ap4/sc.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"texinfo"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package texinfo to your hard drive" --infobox \
"GNU texinfo-3.1\n\
\n\
'Texinfo' is a documentation system that uses a single source file to\n\
produce both on-line information and printed output.  Using Texinfo,\n\
you can create a printed document with the normal features of a book,\n\
including chapters, sections, cross references, and indices.  From the\n\
same Texinfo source file, you can create a menu-driven, on-line Info\n\
file with nodes, menus, cross references, and indices.\n\
\n\
This package is needed to read the documentation files in /usr/info.\n\
\n\
" 13 75
 installpkg ap4/texinfo.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"vim"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package vim to your hard drive" --infobox \
"Version 3.0 of Vim: Vi IMproved\n\
\n\
Vim is an almost compatible version of the UNIX editor vi. Only the\n\
'Q' command is missing (you don't need it). Many new features have\n\
been added: multi level undo, command line history, filename \n\
completion, block operations, etc.\n\
\n\
" 9 75
 installpkg ap4/vim.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"workbone"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package workbone to your hard drive" --infobox \
"Workbone 0.1 \n\
\n\
Text-based audio CD player.\n\
\n\
" 6 75
 installpkg ap4/workbone.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"ispell"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package ispell to your hard drive" --infobox \
"ispell-3.1.08\n\
\n\
Ispell is a fast screen-oriented spelling checker that shows you your\n\
errors in the context of the original file, and suggests possible \n\
corrections when it can figure them out.  Compared to UNIX spell, it\n\
is faster and much easier to use.  Ispell can also handle languages\n\
other than English. Ispell has a long history, and many people have\n\
contributed to the current version -- some of the major contributors\n\
include R. E. Gorin, Pace Willisson, Walt Buehring, and Geoff \n\
Kuenning. \n\
\n\
" 13 75
 installpkg ap5/ispell.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"jpeg"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package jpeg to your hard drive" --infobox \
"Independent JPEG Group's 5beta2 JPEG software\n\
\n\
Software to implement JPEG image compression and decompression. JPEG\n\
(pronounced 'jay-peg') is a standardized compression method for \n\
full-color and gray-scale images.  JPEG is intended for compressing\n\
'real-world' scenes; cartoons and other non-realistic images are not\n\
its strong suit.  JPEG is lossy, however, on typical images of \n\
real-world scenes, very good compression levels can be obtained with\n\
no visible change, and amazingly high compression levels are possible\n\
if you can tolerate a low-quality image.\n\
\n\
" 13 75
 installpkg ap5/jpeg.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"mc"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package mc to your hard drive" --infobox \
"MouseLess Commander version 0.14\n\
The MouseLess Commander is a Norton Commander clone, a program that\n\
manipulates and manages files and directories. Useful, fast, and has\n\
color displays on the Linux console.  Contrary to its name, it also\n\
has mouse support if you run the gpm mouse server.  This program\n\
requires the terminal description files in /usr/lib/terminfo, which\n\
can be found in ncurses.tgz or hdsetup.tgz (the Slackware setup script\n\
package).  mc-0.14 was written by Miguel de Icaza and Mauricio Plaza.\n\
" 10 75
 installpkg ap5/mc.tgz 1> /dev/null 2> /dev/null
fi
if fgrep '"shlbsvga"' /tmp/return 1> /dev/null 2> /dev/null ; then
 dialog --title "Installing package shlbsvga to your hard drive" --infobox \
"Shared library libsvga.so.1.1.8 (from svgalib 1.12)\n\
\n\
Allows you to execute SVGAlib programs that use the shared library.\n\
\n\
" 6 75
 installpkg ap5/shlbsvga.tgz 1> /dev/null 2> /dev/null
fi
rm -f /tmp/return