Intro ===== This document contains a list of the latest stable releases of the most important packages for Linux as well as instructions for newcomers to the 2.0.x series of kernels. By glancing through it, you should be able to find out what you need to upgrade in order to successfully run the latest kernels. Note that I tend to mention the earliest releases of software known to work, not necessarily the latest and greatest versions, as the goal is to provide you with a list of sure-to-work software. It was originally based on material from the linux-kernel mailing list, Jared Mauch's web page "Software Victims of the 1.3 Kernel Development" (http://www2.nether.net/~jared/victim.html), and Axel Boldt's (boldt@math.ucsb.edu) Configure.help file, among other sources, and was originally written and maintained by Alessandro Sigala (ssigala@globalnet.it). There is now a web page based on this material, thanks to John Taylor. Check out http://www.cviog.uga.edu/LinuxBleed.html if you prefer a HTML-ized shopping list. Para aquellos que prefieran una version en castellano de este documento, consultad la traduccion de Alfredo Sanjuan en http://slug.ctv.es/~alfredo/Cambios.html (Spanish translation). Akik magyarul szeretnenek olvasni az uj kernellel kapcsolatos valtozasokrol, az alabbi cimen megtalaljak Nyitrai Tamas forditasat: http://www.datanet.hu/generations/linux/newkernel.html (Hungarian translation). Tamas also maintains a version of this file at http://www.datanet.hu/generations/linux/Changes.html (English version). For people who prefer Japanese (thanks to Mitsuhiro Kojima): Kono bunshou no nihongo ban wa http://jf.gee.kyoto-u.ac.jp/JF/v2.0/Changes-2.0.html ni arimasu. Voyez le site http://www.linux-kheops.com/traduc/kernels/ pour la traduction francaise (merci, David Bourgin). (French translation) Last updated: August 14, 1997. Current Author: Chris Ricker (gt1355b@prism.gatech.edu). Current Releases **************** - Kernel modules 2.0.0 - PPP daemon 2.2.0f - Dynamic linker (ld.so) 1.7.14 - GNU CC 2.7.2.1 - Binutils 2.7.0.3 - Linux C Library Stable: 5.2.18, Beta: 5.4.33 - Linux C++ Library 2.7.2.1 - Termcap 2.0.8 - Procps 1.01 - Gpm 1.10 - SysVinit 2.64 - Util-linux 2.5 - Mount 2.5p - Net-tools 1.32-alpha - Kbd 0.91 Upgrade notes ************* Network errors with recent kernels ================================== Many default network scripts are set up to add a route to the localhost at 127.0.0.1 at startup. However, they do this incorrectly. To fix the error, which is now spotted by the kernel (causing many daemons to quit working), look for a line like `route add -net 127.0.0.1' in your network configuration files and change it to `route add -net 127.0.0.0'. This error is present in all Red Hat distributions through Red Hat 3.03 (and derivative distributions like Caldera). If you're running one of these, edit /etc/sysconfig/network-scripts/ifup-lo, changing the line `route add -net $(IPADDR)' to `route add -net 127.0.0.0' and you should be fine. People have also reported problems due to the naming of the dummy network interface driver. If the dummy driver is compiled into the kernel, its name is "dummy." If the dummy driver is compiled as a module, its name is "dummy0." Furthermore, more than one dummy driver can be loaded if compiled as a module. Each subsequent loading of the driver adds a new dummy interface whose name is incremented by one ("dummy1," "dummy2," etc.). Booting Changes =============== The boot support in 2.0.x (for arch/i386) has been enhanced so that it now can load bigger kernels (bzImage) and that the loaders now can load an initial ramdisk (initrd). For initrd see Documentation/initrd.txt. For building bigger kernels use one of the following make targets: bzImage, bzlilo, bzdisk (equivalent to make targets zImage, zlilo, and zdisk respectively). If you want or need to use the new features you'll need to upgrade your bootloaders. Lilo can be found at ftp://lrcftp.epfl.ch/pub/linux/local/lilo/lilo.19.tar.gz. LOADLIN is at ftp://sunsite.unc.edu/pub/Linux/system/Linux-boot/lodlin16.tgz. If you're using more unusual loaders like SysLinux or etherboot, the latest versions are 1.3 and 2.0, respectively. Ramdisk support does not work with the latest kernels if ramdisk=0 option is present. Many older distributions (mainly Slackware) have this option in their lilo.config file. Comment it out and re-run lilo if you need ramdisks. The definition of SIOCSARP in /usr/include/linux/sockios.h was changed. This means bootpd has to be re-compiled in order to work. The kernel reboot method is now, by default, a cold reboot so that the kernel will work on systems that don't support other methods. If you want to be able to do a warm reboot, add a reboot=warm option to lilo.conf. The Linux C Library =================== The latest stable Linux C Library release is 5.2.18. If you upgrade to this from 5.0.9 or earlier, be sure to read the `release.libc-5.2.18' file, since GNU make and a few other fairly important utils can be broken by the upgrade. A current common Linux C Library release is 5.3.12. In this release there are some important changes that may cause troubles to buggy programs (programs that call free() on a pointer not returned by malloc(), such as Netscape, work with previous libc, but not with this release) so read the `release.libc-5.3.12' file carefully! In the latest libc releases a dirent bug, which erroneously defined d->reclen to d->namlen if USE_GNU was defined, has been fixed. Unfortunately, some GNU packages depend on this bug. GNU make 3.xx is one of them. To fix that you need to patch and recompile those programs (a patch for make is included in the file `release.libc-.5.3.9', and the address to obtain a precompiled binary is at the end of this file). Also, the libc-5.3.x line has a known security hole relating to rlogin. Libc-5.3.12 fixes this, so if you're going to run an experimental libc, be sure to upgrade to 5.3.12. Libc-5.4.33 is currently available as well, but it may have problems, so caveat emptor. It fixes lots of problems, but may break even more programs than 5.3.12. If you're getting an error message that is something to the effect of `fcntl_setlk() called by process 123 with broken flock() emulation' then you need to upgrade to at least libc-5.2.18 as well. A proper (in other words, BSD-style ;-) flock system call was added to 2.0.x, and older libc's will now give this error. It doesn't *really* matter, so you can just ignore it. If it really annoys you, upgrade libc (and recompile any static binaries you might have that are linked against the old libc). If you're feeling lazy, just comment out ` printk(KERN_WARNING "fcntl_setlk() called by process %d with broken flock() emulation\n", current->pid);' in linux/fs/locks.c and recompile. If you're still running a.out, there's an unofficial libc-4.7.6 release out to which you can upgrade to fix this problem. Libc is available from ftp://sunsite.unc.edu/pub/Linux/GCC/. GCC Signal 11 error =================== Many people have been reporting messages like the following, especially when compiling a new kernel: `gcc: Internal compiler error: program cc1 got fatal signal 11'. This is NOT a kernel bug. Rather, these messages are generally caused by hardware problems. See http://www.bitwizard.nl/sig11/ for the sig11 FAQ. On the other hand, if you're using a gcc patched for Pentium optimization and are getting these errors, downgrade to a standard GNU gcc before assuming your hardware (or the kernel) is to blame. On a related note, if you get random OOPses that don't seem to be related to anything and you have a motherboard with APM support, try disabling the APM support and/or compiling the kernel with APM support. Procps utilities ================ Due to changes in the structure of the /proc filesystem, you need to upgrade procps to the latest release, currently 1.01. Otherwise, you'll get floating point errors with some ps commands or other similar surprises. Grab ftp://sunsite.unc.edu/pub/Linux/system/Status/ps/procps-1.01.tgz. Kernel Modules ============== Almost all drivers in 2.0.x can be modules, and kerneld is now incorporated into the kernel. To take advantage of this, you'll need the latest version of the module support apps. These are available at http://www.pi.se/blox/modules/modules-2.0.0.tar.gz. Note: If you try to load a module and get a message like `gcc2_compiled, undefined Failed to load module! The symbols from kernel 1.3.foo don't match 1.3.foo' where `foo' is a number for a recent kernel, then it's definitely time to upgrade module utilities. Another little tip: you can't have both a.out *and* ELF support compiled as modules. Otherwise, you get a nice Catch-22 when you try to run insmod to install a.out/ELF support so you can run insmod ;-). If you have an all-ELF system, but need a.out for the occasional legacy app, then you can do a.out support as a module. Otherwise, you should probably leave it in the kernel, and if you haven't gone ELF yet, you can probably say no to ELF support. Similarly, any partitions that you have to mount at startup have to have their necessary file system and device drivers compiled into the kernel, so don't get grandiose ideas about going completely modular and then forget to compile ext2fs support and ide/SCSI drive support into your kernel ;-). Kernel messages =============== Kernel messages without a specific log level use the kernel's default log level. In 1.2 kernels, the default log level was 6 (information), while in 2.0.x kernels it is 4 (warning). Adjust your configuration of syslogd appropriately (or edit printk.c in the kernel source ;-). PPP driver ========== You need to be running a pppd from ppp-2.2.0.tar.gz or greater. The latest stable release is 2.2.0f and is available at ftp://sunsite.unc.edu/pub/Linux/system/Network/serial/ppp/ppp-2.2.0f.tar.gz. Named pipes (SysVinit) ====================== Linux's handling of named pipes changed (it now does it The Right Way instead of the SunOS way ;-). This broke some programs that depended on the SunOS behavior, most notably SysVinit. If you're running 2.59 or earlier, you will probably get a weird error on shutdown in which your computer shuts down fine but "INIT: error reading initrequest" or words to that effect scroll across your screen hundreds of times. To fix, upgrade to ftp://sunsite.unc.edu/pub/Linux/system/Daemons/init/sysvinit-2.64.tar.gz. If you're trying to run NCSA httpd, you might have problems with pre-spawning daemons. Upgrade to the latest release (1.5.2), available from http://hoohoo.ncsa.uiuc.edu/ or check out Apache (http://www.apache.org/). The new named pipe behavior also causes problems with Hylafax. If you're running the hylafax daemon, it will just keep eating up CPU time until you have no idle time free. To fix this, edit port.h included with the Hylafax distribution and change the line CONFIG_OPENFIFO="O_RDONLY" to CONFIG_OPENFIFO="O_RDWR" A similar method (finding all named pipes opened read-only and changing them to read-write) will fix any program that is broken because of this change. File Locking (Sendmail) ======================= As of pre2.0.6 (aka 1.99.6), mixed-style file locking is no longer allowed. For example, a file cannot be simultaneously locked with `flock' and `fcntl'. See Documentation/locks.txt for all the gory details. Among the programs this has impacted are older sendmails. If you get a message that sendmail cannot lock aliases.dir (or other files), you'll need to upgrade to at least 8.7.x. The latest sendmail is at ftp://ftp.cs.berkeley.edu/ucb/src/sendmail/sendmail.8.8.7.tar.gz. Uugetty ======= Older uugettys will not allow use of a bidirectional serial line. To fix this problem, upgrade to ftp://sunsite.unc.edu/pub/Linux/system/Serial/getty_ps-2.0.7i.tar.gz. Kbd === For those of you needing non-ASCII character/font support, you should upgrade to ftp.funet.fi:/pub/OS/Linux/PEOPLE/Linus/kbd-0.91.tar.gz. Mount ===== The mount util is distributed as part of util-linux, which is currently at release 2.5. Some may find, especially when using the loop or xiafs file system, NFS, or automounting, that they need to upgrade to the latest release of mount, available from ftp://ftp.win.tue.nl/pub/linux/util/mount-2.5p.tar.gz. Console ======= The Linux console type has changed. If your setup is old enough that you have problems, you'll need to update your termcap. To fix, add linux to one of the types in /etc/termcap or snoop around http://www.ccil.org/~esr/ncurses.html (reputedly the latest universal termcap maintainer). You may also need to update terminfo by running the following as root: ln -s /usr/lib/terminfo/l/linux /usr/lib/terminfo/c/console Better yet, just get the latest official Linux termcap from ftp://sunsite.unc.edu/pub/Linux/GCC/termcap-2.0.8.tar.gz. If you upgrade to this release read the `README' file contained into the package to get some important information about the `tgetent' function changes! Note that there is now a fixed version at ftp://sunsite.unc.edu/pub/Linux/GCC/termcap-2.0.8.fix. If some of your apps complain that termcap entries are too long and you don't need some of the more esoteric terms in the standard 2.0.8 termcap, just download termcap-2.0.8.fix and move it to /etc/termcap. Also, the console driver is now responsible for keeping track of correspondence between character codes and glyph bitmaps. If you encounter problems, try `loadunimap def' to get back the default correspondence. Hdparm ====== Hdparm has been upgraded to take advantage of the latest features of the kernel drivers. The latest non-beta version can be found at ftp://sunsite.unc.edu/pub/Linux/kernel/patches/diskdrives/hdparm-3.1.tar.gz. IP Accounting ============= All IP packets coming in or going out via one of the network interfaces are now passing the accounting chain. So, packets being forwarded are passing this chain twice. Since pre2.0.7 (aka 1.99.7), accounting rules can be defined so that they will only match in one direction (either incoming or outgoing). There also exists a possibility to match on device names and/or device addresses, so that only packets coming in/going out via that device (network interface) match with a rule. You'll need to get ipfwadm from ftp://ftp.xos.nl/pub/linux/ipfwadm/ipfwadm-2.3.0.tar.gz to use this. IP Firewalls ============ The IP firewall code has been changed drastically for 2.0.x. There are now 3 categories of firewall rules: one for incoming packets, one for outgoing packets, and one for packets being forwarded. There also exists a possibility to match on device names and/or device addresses, so that only packets coming in/going out via that device (network interface) match with a rule. This is especially useful to prevent spoofing. You'll need to get ftp://ftp.xos.nl/pub/linux/ipfwadm/ipfwadm-2.3.0.tar.gz to use this. IP Masquerading =============== IP masquerading is now part of the standard kernel. However, you always need to load separate modules (ip_masq_ftp.o and/or ip_masq_irc.o) if you are going to use FTP or IRC in combination with masquerading. You'll need to get ftp://ftp.xos.nl/pub/linux/ipfwadm/ipfwadm-2.3.0.tar.gz to use this. ISDN support ============ The new kernels support ISDN. You'll need ISDN utils available from ftp://ftp.franken.de/pub/isdn4linux/v2.0/isdn4k-utils-2.0.tar.gz to try this. Frame Relay =========== Frame relay support for Linux is now available as well. Currently, only Sangoma cards are supported, but the interface is such that others will be as drivers become available. To use this, grab ftp://linux.invlogic.com/pub/fr/frad-0.15.tgz (soon to be frad-0.20.tgz). Another package of interest is ftp://linux.invlogic.com/pub/routing/routing.tgz (which allows Linux to make routing decisions based on packet source). Networking ========== Some of the /proc/net entries have changed. You'll need to upgrade to the latest net-tools in ftp://ftp.inka.de/pub/comp/Linux/networking/NetTools/, where the latest is currently net-tools-1.32-alpha.tar.gz. See http://www.inka.de/sites/lina/linux/NetTools/index_en.html for more information. Note that there is currently no ipfw (which is part of net-tools) which works with 2.0.x kernels. If you need its functions, learn how to use ipfwadm or patch ipfw to get it to work (ipfw's current maintainer does not currently have time to fix it). Xntpd ===== Older versions of xntpd will not work with the latest kernels. Upgrade to xntp3.5f.tar.Z, available from ftp://louie.udel.edu/pub/ntp/xntp3.5f.tar.Z. Sound driver ============ The sound driver was upgraded in the 2.0.x kernels, breaking vplay. To fix this problem, get a new version of the sndkit from ftp://ftp.best.com/pub/front/tasd/snd-util-3.5.tar.gz. Some users report that various other sound utils (cdd2wav-sbpcd, for example) need to be recompiled before they will work with the new kernels. Tcsh ==== If tcsh acts funny, get the source from ftp://anise.ee.cornell.edu/pub/tcsh and add #define SYSMALLOC in config_f.h before recompiling tcsh. Binaries can be found in ftp://sunsite.unc.edu/pub/Linux/system/Shells/ and a corrected one will probably wind up there eventually. Make ==== If make no longer works, you need to read the release notes for the libc you upgraded to. The latest libc and release notes can be found at ftp://tsx-11.mit.edu/pub/linux/packages/GCC. This is NOT an error due to the kernel, though many people have mistakenly thought it is. When you upgrade to libc-5.3.9, you have to patch make to get it to work. All of this is documented in the release notes with libc. Upgrading libc can also break xterm support. If it does, you need to recompile xterm. Loop device =========== 2.0.x kernels include loop device support which lets you mount a file as a file system, which can allow for all sorts of cool things like encrypted file systems and such. To use it, you'll need a modified version of mount from ftp://ftp.win.tue.nl/pub/linux/util/mount-2.5k.tar.gz; preliminary work on encrypted file system support can be found in ftp.funet.fi:/pub/Linux/BETA/loop/des.1.tar.gz. Multiple device =============== Multiple device support (allowing you to group several partitions into one logical device) has also been added. Check out ftp://sweet-smoke.ufr-info-p7.ibp.fr/pub/Linux/md035.tar.gz to try this out. Arp === Arp daemon support has been added. Check out http://www.loran.com/~layes/arpd/index.html for more info and http://www.loran.com/~layes/arpd/arpd-1.0.2.tar.gz for a copy of arpd. Quota ===== Quota support has also been added. You need to get quotas-1.55 from ftp://ftp.funet.fi/pub/Linux/kernel/src/subsystems/quota/all.tar.gz. You may need to copy its mntent.h over to /usr/include/mntent.h to get it to compile. Process Accounting ================== Process accounting support has also been integrated into the new kernels. To use this feature, you'll need to get ftp://iguana.hut.fi/pub/linux/Kernel/process_accounting/acct_1.3.73.tar.gz. Bdflush and Updated =================== Bdflush has also been integrated into the new kernels, so those of you using it on older systems no longer need to hunt for the patches to implement it once you upgrade to 2.0.x. You do still need to run the update daemon, however. You should probably upgrade to the latest updated, currently ftp://sunsite.unc.edu/pub/Linux/system/Daemons/updated-1.2.tar.gz. This (and later) versions will not spawn a bdflush daemon, since that is now done by the kernel (kflushd). If you upgrade, be sure to leave update in your init scripts and remove bdflush. APM support =========== Advanced Power Management (APM) support has been added to the kernel as well. APM, which is primarily of use in laptops, provides access to battery status information and may help to conserve battery power. The support files can be found in ftp://tsx-11.mit.edu/pub/linux/packages/laptops/apm/apmd-2.4.tar.gz iBCS and Dosemu =============== For a version of iBCS that works with 2.0.x kernels, grab ftp://tsx-11.mit.edu/pub/linux/BETA/ibcs2/ibcs-2.0-960610.tar.gz For a version of Dosemu that works (well, at least as well as DOS ever works ;-), get ftp://tsx-11.mit.edu/pub/linux/ALPHA/dosemu/Development/dosemu-0.64.0.3.tgz or check out http://www.ednet.ns.ca/auto/rddc. Be sure to follow the instructions in README.newkernels about patching your include files, or it will not compile. Mtools and Fdutils ================== The floppy ioctl numbering scheme has changed for 2.0.x. For backwards compatibility, the old system was supported through 1.3.x and will generate a warning in 2.0. In 2.1.x, the old scheme will disappear entirely. To avoid trouble (or at least annoying messages), you'll need to recompile any programs which emit floppy ioctls, including mtools and fdutils. For mtools, get ftp://sunsite.unc.edu/pub/Linux/utils/disk-management/mtools-3.0.src.tar.gz and for fdutils, get ftp://sunsite.unc.edu/pub/Linux/system/Misc/fdutils-4.3.src.tar.gz. In the future, fdformat might disappear entirely, so get used to using superformat instead. Cyclades Serial Driver ====================== The Cyclades driver has been changed so that the minor numbers start at 0 instead of 32 (for example, ttyC0 should be major 19, minor 0 for 2.0.x kernels; in older kernels, it would have been major 19, minor 32). Use mknod or a sufficiently new version of MAKEDEV to fix this. NCR 53c810 SCSI Driver ====================== Drivers for this card are now included in the standard linux source. However, they require Perl to be installed before they will compile. As far as I know, this is the only code in the kernel source that requires Perl to compile. If your kernel compile fails and you happen to have included this driver in your configuration, make sure you have Perl installed. Perl ==== While we're on the subject, changes made for the 2.0.x series cause the connect() Perl (both 4 and 5) call to time out while connecting to remote systems. The problem is not actually in the connect() call; rather, the optional bind() call usually used with connect() causes the problem. Remove the bind() call and your Perl scripts should connect. Also, Perl scripts using the readdir call now misbehave if you're using an old version of Perl, due to changes in libc. Upgrade to a more current Perl to avoid any unpleasantness. Groff ===== Those of you running Slackware may experience weirdness with man pages due to changes in groff. If your man pages display for - when present at the end of a line, try setting an appropriate value (many have reported success with "latin1", for example) for the environmental variable LESSCHARSET. Another, and probably better, solution is to edit the file /usr/lib/man.config and change all `-Tlatin1' options to `-Tascii'. An alternate solution, for those of you who can't reformat your man files in .../cat* directories is to edit /usr/lib/man.config, setting the PAGER to `PAGER (LESSCHARSET=latin1;export LESSCHARSET;/usr/bin/less -is)'. E2fsprogs ========= e2fsprogs 1.02 will work with the latest kernels, but it cannot be compiled on them. If you need (or want) to compile your own copy, you'll need to get the latest version, currently available at ftp://tsx-11.mit.edu/pub/linux/packages/ext2fs/e2fsprogs-1.06.tar.gz. How to know the version of the installed programs ************************************************* There are some simple methods useful to know the version of the installed programs and libraries. The SysVinit version display requires that you be logged in as root. GNU CC: gcc -v and gcc --version PPP: pppd -h (wrong but it show the version) Libc: ls -l /lib/libc.so.5 Libc++: ls -l /usr/lib/libg++.so Binutils: ld -v ldd: ldd -v and ldd -V termcap: ls -l /lib/libtermcap.so.* modules: insmod -V procps: ps --version SysVinit: cat /proc/`cat /var/run/syslog.pid`/environ|strings|awk '$1 ~ /INIT_VERSION/ {print}' Where to get the files ********************** Binutils ======== ftp://tsx-11.mit.edu:/pub/linux/packages/GCC/binutils-2.7.0.3.bin.tar.gz Installation notes: ftp://tsx-11.mit.edu:/pub/linux/packages/GCC/release.binutils-2.7.0.3 GNU CC ====== ftp://sunsite.unc.edu/pub/Linux/GCC/gcc-2.7.2.1.bin.tar.gz Installation notes: ftp://sunsite.unc.edu/pub/Linux/GCC/release.gcc-2.7.2.1 Linux C Library =============== The stable 5.2.18 release: ftp://sunsite.unc.edu/pub/Linux/GCC/libc-5.2.18.bin.tar.gz Installation notes for 5.2.18: ftp://sunsite.unc.edu/pub/Linux/GCC/release.libc-5.2.18 The latest 5.4.33 release: ftp://sunsite.unc.edu/pub/Linux/GCC/libc-5.4.33.bin.tar.gz Installation notes for 5.4.33: ftp://sunsite.unc.edu/pub/Linux/GCC/release.libc-5.4.33 Patched make sources: ftp://sunsite.unc.edu/pub/Linux/devel/make/make-3.74.patched.tar.gz Patched make binary: ftp://sunsite.unc.edu/pub/Linux/devel/make/make-3.74-direntfix-elf.tgz Linux C++ Library ================= ftp://sunsite.unc.edu/pub/Linux/GCC/libg++-2.7.2.1.bin.tar.gz Installation notes: ftp://sunsite.unc.edu/pub/Linux/GCC/release.libg++-2.7.2.1 Dynamic Linker ============== ftp://sunsite.unc.edu/pub/Linux/GCC/ld.so-1.7.14.tar.gz Termcap Library =============== ftp://sunsite.unc.edu/pub/Linux/GCC/termcap-2.0.8.tar.gz Modules utilities ================= The latest public release: ftp://sunsite.unc.edu/pub/Linux/kernel/modules-2.0.0.tar.gz PPP Daemon and utilities ======================== The latest public release: ftp://sunsite.unc.edu/pub/Linux/system/Network/serial/ppp/ppp-2.2.0f.tar.gz Procps utilities ================ ftp://sunsite.unc.edu/pub/Linux/system/Status/ps/procps-1.01.tgz Gpm mouse utilities =================== ftp://iride.unipv.it/pub/gpm/gpm-1.10.tar.gz ftp://sunsite.unc.edu/pub/Linux/system/Daemons/gpm-1.10.tar.gz SysVinit utilities ================== ftp://sunsite.unc.edu/pub/Linux/system/Daemons/init/sysvinit-2.64.tar.gz Util-linux ========== ftp://sunsite.unc.edu/pub/Linux/system/Misc/util-linux-2.5.tar.gz Mtools ====== ftp://sunsite.unc.edu/pub/Linux/utils/disk-management/mtools-3.0.src.tar.gz Fdutils ======= ftp://sunsite.unc.edu/pub/Linux/system/Misc/fdutils-4.3.src.tar.gz Other Info ========== Please remember that most of these utils are available on your favorite local linux mirror. If you can, please get them from a closer site before checking sunsite. Also, for those of you running Red Hat (or RPM on a different distribution), most of these are available in RPM format. Check around your favorite Red Hat mirror site before installing the non-RPM version. Remember, you might need to use the -force option to get the upgrade to install. Almost everything you need is available in ftp://ftp.redhat.com/pub/current/i386/updates/2.0-kernel/ and its mirrors. For others, David Bourgin has put together a package of everything necessary to quickly and easily upgrade to 2.0.x. See ftp://ftp.wsc.com/pub/freeware/linux/update.linux/ for more information and the files. This package also includes many bug-fixes, such as the latest sendmail. There's also an alternate lightweight termcap in the same directory that works well for many people. Please send info about any other packages that 2.0.x "broke" or about any new features of 2.0.x that require extra or new packages for use to Chris Ricker (gt1355b@prism.gatech.edu). I generate this from a modified texinfo setup, so you don't need to bother generating a diff against the current version before you send the additional information to me.