20090125 - Updated bind to 9.4.3-P1 *SECURITY FIX* - Updated ntp to 4.2.4p6 *SECURITY FIX* - Patched openssl (and -solibs). *SECURITY FIX* 20090111 in patches/: - Updated Firefox to 2.0.0.20 *SECURITY FIX* - Updated Seamonkey to 1.1.14 *SECURITY FIX* - Updated Seamonkey to 2.0.0.19 *SECURITY FIX* 20081216 I'd like to remind everyone that as announced back in May on slamd64-security, support for 11.0 is due to be discontiued as of the next release. in patches/: - Replaced Seamonkey package with the 11.0 one (was 12.0). - Renamed vim-gvim to have 11.0, not 12.0 in the name (was correct package, incorrectly named). 20081215 in extra/: - Updated PHP5 to 5.2.8 *SECURITY FIX* 20081207 in patches/: - Updated Mozilla Firefox to 2.0.0.18 *SECURITY FIX* - Updated Seamonkey to 1.1.13 *SECURITY FIX* - Updated Mozilla Thunderbird to 2.0.0.18 *SECURITY FIX* - Updated libxml2 to 2.6.32 *SECURITY FIX* - Updated ruby to 1.8.7-p72 *SECURITY FIX* - Updated samba to 3.0.33 *SECURITY FIX* 20081009 in patches/: - Updated Mozilla Firefox to 2.0.0.17 *SECURITY FIX* - Updated Mozilla Thunderbird to 2.0.0.17 *SECURITY FIX* - Updated Seamonkey to 1.1.12 *SECURITY FIX* 20080907 in patches/: - Updated php4 in to 4.4.9 - *SECURITY FIX* Please note that PHP4 is being dropped by the PHP project at the end of the year, and you should make sure you are able to migrate away by then. 20080831 in patches/: - Updated Amarok to 1.4.10 - requires new libgpod. *SECURITY FIX* - Updated dnsmasq to 2.45 - *SECURITY FIX* - Updated fetchmail to 6.3.8 - *SECURITY FIX* - Updated libgpod to 0.6.0 - Updated links to 2.1 - *SECURITY FIX* - Rebuilt OpenSSH against new OpenSSL - Updated OpenSSL to 0.9.8h - *SECURITY FIX* Be sure to update OpenSSH and proftpd when installing this update. - Updated proftpd to 1.3.1, and rebuilt against new OpenSSL - Updated python to 2.4.5 - *SECURITY FIX* - Updated vim and vim-gvim to 7.1.330 - *SECURITY FIX* 20080722 in patches/: - Updated Mozilla Firefox to 2.0.0.16 - *SECURITY FIX* - Updated Seamonkey to 1.1.11 - *SECURITY FIX* 20080716 in patches/: - Updated Ruby to 1.8.6_p230 - *SECURITY FIX* - Updated Bind to 9.4.2_P1 - *SECURITY FIX* - Updated Mozilla Firefox to 2.0.0.15 - *SECURITY FIX* - Updated Seamonkey to 1.1.10 - *SECURITY FIX* 20080605 in patches/: - Updated libpng to 1.2.27 - *SECURITY FIX* - Updated samba to 3.0.30 - *SECURITY FIX* - Updated rdesktop to 1.6.0 - *SECURITY FIX* 20080509 in extra/ - Updated PHP5 to 5.2.6 *SECURITY FIX* in patches/: - Updated Mozilla Thunderbird to 2.0.0.14 *SECURITY FIX* 20080428 in patches/: - Rebuilt xine-lib with --without-speex and --disable-nosefart *SECURITY FIX* 20080421 in patches/: - Updated bzip2 to 1.0.5 *SECURITY FIX* - Updated m4 to 1.4.11 *SECURITY FIX* - Patched xine-lib to fix playback of several formats that were accidentally broken in 1.1.11.1. - Updated Mozilla Firefox to 2.0.0.14 *SECURITY FIX* 20080407 20080407 in patches/: - Updated openssh to 5.0p1 *SECURITY FIX* 20080401 in patches/: - Updated xine-lib to 1.1.11.1 *SECURITY FIX* 20080330 in patches/: - Updated xine-lib to 1.1.11 *SECURITY FIX* - Updated seamonkey to 1.1.9 *SECURITY FIX* - Updated Mozilla Firefox to 2.0.0.13 *SECURITY FIX* 20080322: in patches/: - Updated Mozilla Thunderbird to 2.0.0.12 *SECURITY FIX* - Patched espgs with CESA-2008-001 fix *SECURITY FIX* 20080215 in patches/: - Updated MySQL to 5.0.51 - this was delayed as I didn't know about it, due to some slackware-security emails going missing. Thanks to 'Gargamel' on the forums for pointing this out. *SECURITY FIX* - Updated Mozilla Firefox to 2.0.0.12 *SECURITY FIX* - Updated Seamonkey to 1.1.8 *SECURITY FIX* - Updated Apache to 1.3.41 *SECURITY FIX* - Updated PHP to 4.4.8 *SECURITY FIX* - Updated mod_ssl to 2.8.31_1.3.41 20071204 in patches/: - Updated cairo to 1.4.12 *SECURITY FIX* - Updated samba to 3.0.27a, fixing a smbfs regression in 3.0.27 20071203 in extra/: - Added php5 5.2.5 *SECURITY FIX* in patches/: - Updated Mozilla Firefox to 2.0.0.11 *SECURITY FIX* - Updated Mozilla Thunderbird to 2.0.0.9 *SECURITY FIX* - Updated Seamonkey to 1.1.7 *SECURITY FIX* - Updated libpng to 1.2.23 *SECURITY FIX* - Updated rsync to 2.6.9, and added security patches *SECURITY FIX* - Updated samba to 3.0.27 *SECURITY FIX* - Updated xpdf to 3.02pl2 *SECURITY FIX* - Patched PDF issues in kdegraphics *SECURITY FIX* - Patched PDF issues in koffice *SECURITY FIX* 20071028 in patches/: - Updated Mozilla Firefox to 2.0.0.8 *SECURITY FIX* - Updated Seamonkey to 1.1.5 *SECURITY FIX* 20070919 in extra/: - Removed php5, as it's now in patches/. in patches/: - Repackaged JDK with a symlink fix (bug 305). - Updated PHP to 5.2.4 - this replaces PHP 4, which has been end-of-lifed by the PHP project. *SECURITY FIX* - Updated OpenSSH 4.7p1 *SECURITY FIX* - Updated Samba to 3.0.26a *SECURITY FIX* 20070912 in patches/: - Updated JRE to 6u2 *SECURITY FIX* - Updated JDK to 6u2 *SECURITY FIX 20070821 in patches/: - Removed old versions of packages; please keep in mind that 3rd-party package managers are officially not supported. - Updated tcpdump to 3.9.7/libpcap 0.9.7 *SECURITY FIX* 20070815 - Rebuild bind with proper package naming. Please double check in that you don't have two bind packages installed due to the bad naming of the previous patch. 20070814 in extra/: - Moved Mozilla Firefox 2.0 to patches/ as 1.5 is no longer supported. in patches/: - Updated bind to 9.4.1P1. *SECURITY FIX* - Updated gd to 2.0.35 *SECURITY FIX* - Patched poppler to fix an integer overflow - *SECURITY FIX* - Patched qt with fix for a format string vulnerability - *SECURITY FIX* - Updated gimp to 2.2.17 - *SECURITY FIX* - Updated Mozilla Firefox to 3.0.0.6; moved from extra/ as the 1.5 series is no longer supported - *SECURITY FIX* - Updated Mozilla Thunderbird to 2.0.0.6 - *SECURITY FIX* - Updated Mozilla Seamonkey to 1.1.4 - *SECURITY FIX* - Updated xpdf to 3.02pl1 - fixes an integer overflow - *SECURITY FIX* 20070618 in patches/: - Updated libexif to 0.6.16 *SECURITY FIX* - Updated samba to 3.0.25a *SECURITY FIX* - Updated Mozilla Thunderbird to 2.0.0.4 *SECURITY FIX* 20070603 - Updated Firefox 2 in extra/ to 2.0.0.4 *SECURITY FIX* - Updated php5 in extra/ to 5.2.3 *SECURITY FIX* in patches/: - Updated Mozilla Firefox to 1.5.0.12 *SECURITY FIX* - Updated Mozilla Thunderbird to 1.5.0.12 *SECURITY FIX* - Updated Mozilla Seamonkey to 1.1.2 *SECURITY FIX* 20070601 - Updated php5 in extra/ to 5.2.2 *SECURITY FIX* - Updated Mozilla Firefox 2 in extra/ to 2.0.0.3 *SECURITY FIX* in patches/: - Updated freetype to 2.3.4 *SECURITY FIX* - Updated PHP to 4.4.7 *SECURITY FIX* - Updated Samba to 3.0.26 *SECURITY FIX* - Updated xine-lib to 1.1.6 *SECURITY FIX* - Updated libpng to 1.2.18 *SECURITY FIX* 20070410 I'm not giving descriptions of the security problems here, as it's a pointless duplication of the information found in the Slackware ChangeLog, and my copying it introduces another source of error. Of course, I will still include descriptions of updates for packages that aren't in Slackware but are in Slamd64. Apologies for the added inconvenience, however I believe that most people who apply these updates don't actually read the details anyway. In patches/: - Updated 'file' to 4.20 - note that you should install this package, even if you don't have a "file" package currently installed. In 11.0, "file" is part of the "bin" package, which every slamd64 install should have. *SECURITY FIX* - Updated GnuPG to 1.4.7 *SECURITY FIX* - Updated ImageMagick to 6.3.3-0 *SECURITY FIX* - Updated Mozilla Firefox to 1.5.0.11 *SECURITY FIX* - Updated Mozilla Thunderbird to 1.5.0.10 *SECURITY FIX* - Updated Qt to 3.3.8 *SECURITY FIX* - Rebuilt qca against new qt - Rebuilt qca-tls against new qt 20070305 - Updated php to 4.4.5 (in patches) and to 5.2.1 (in extra/) - this fixes several security and stability issues; for full details, see http://www.php.net. Some of these have been given CVE numbers: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0906 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0907 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0908 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0909 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0910 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0988 *SECURITY FIX* 20070210 In patches/ - Updated samba to 3.0.24 - this fixes a denial of service issue, and several other issues that do not affect Slamd64. For more information, see: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0452 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0453 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0454 *SECURITY FIX* 20070130 In patches/ - Rebuilt qca-tls against new Qt Thanks to Carlos Corbacho for pointing out that this was required for jabber+ssl to work in Kopete. - Patched autofs with a long vs int AMD64 problem fixed. http://bugs.slamd64.com/show_bug.cgi?id=183 - Rebuilt kdebase against new libpng - I think this is the last of them... - Rebuilt kdeartwork including missing xscreensaver support and kwin decorations. http://bugs.slamd64.com/show_bug.cgi?id=208 20070129 In patches/ - Updated bind to 9.3.4 - this fixes two denial of service vulnerabilities where an attacker could crash the name server with specially crafted malformed data. For more information, see: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0493 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-0494 *SECURITY FIX* - Updated fetchmail to 6.3.6 - this fixes two security issues. A bug introduced in 6.3.5 could cause fetchmail to crash. Secondly, another bug could cause fetchmail to send a password in clear text or omit using TLS even when configured otherwise. Please either switch to using getmail, or upgrade to this new version. For more information, see: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-5974 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-5867 *SECURITY FIX* - Repackaged flex with a libdir issue fixed. http://bugs.slamd64.com/show_bug.cgi?id=191 - Rebuilt arts, gd, imlib, libwmf, links, sdl, windowmaker against new libpng http://bugs.slamd64.com/show_bug.cgi?id=198 - Updated Qt to 3.3.7 with various fixes http://bugs.slamd64.com/show_bug.cgi?id=182 http://bugs.slamd64.com/show_bug.cgi?id=188 http://bugs.slamd64.com/show_bug.cgi?id=198 - Rebuilt kdelibs against new Qt - Rebuilt kdeartwork against new Qt - Repackaged xscreensaver with a missing symlink added - Rebuild libexif with fixing various problems including a broken pkgconfig file http://bugs.slamd64.com/show_bug.cgi?id=180 - Rebuild tcpip with a 64-bit vconfig http://bugs.slamd64.com/show_bug.cgi?id=185 20070112 Sorry these have taken so long; hopefully I'll have some non-security updates for -current shortly. - Updated Mozilla Firefox 2 in extra/ to 2.0.0.1 - this upgrade fixes several possible security bugs. For more information, see: http://www.mozilla.org/projects/security/known-vulnerabilities.html#firefox *SECURITY FIX* In patches/ - Updated Mozilla Firefox to 1.5.0.9 - this upgrade fixes several possible security bugs. For more information, see: http://www.mozilla.org/projects/security/known-vulnerabilities.html#firefox *SECURITY FIX* - Updated Mozilla Thunderbird to 1.5.0.9 - this upgrade fixes several possible security bugs. For more information, see: http://www.mozilla.org/projects/security/known-vulnerabilities.html#thunderbird *SECURITY FIX* - Updated Mozilla Seamonkey to 1.0.7 - this upgrade fixes several possible security bugs. For more information, see: http://www.mozilla.org/projects/security/known-vulnerabilities.html#seamonkey *SECURITY FIX* - Updated xine-lib to 1.1.3 - this fixes possible security problems such as a heap overflow in libmms and a buffer overflow in the Real Media input plugin. For more information, see: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-2200 *SECURITY FIX* - Updated gnupg to 1.4.6 - this release fixes a severe and exploitable bug in earlier versions of gnupg. All gnupg users should update as soon as possible. This update also addresses a more minor security issue possibly exploitable when GnuPG is used in interactive mode. For more information, see: http://lists.gnupg.org/pipermail/gnupg-announce/2006q4/000491.html http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-6235 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-6169 *SECURITY FIX* 20061204 In patches/ - Updated tar to 1.16 - this fixes an issue where files can be extracted outside the current directory, possibly allowing a malicious tar archive to overwrite any files on the system. For more information, see: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-6097 *SECURITY FIX* - Updated proftpd to 1.3.0a with an additional security patch. This fixes several security problems, potentially leading to arbitrary code execution, including one in mod_tls which does not require the user to be authenticated. For more information, see: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-5815 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-6170 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-6171 *SECURITY FIX* - Updated libpng to 1.2.14 - this fixes a bug where a specially crafted png image could crash an application using libpng. For more information, see: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-5793 This package also fixes a non-security-related issue regarding MMX handling: http://bugs.slamd64.com/show_bug.cgi?id=149 20061122 In patches/ - Added Mozilla Firefox 1.5.0.8 package, and moved the 2.0 package to extra/ *SECURITY FIX* - Updated Mozilla Thunderbird to 1.5.0.8 *SECURITY FIX* - Updated Mozilla Seamonkey to 1.0.6 *SECURITY FIX* 20061107 In patches/ - Updated bind to 9.3.2-P2; this fixes issues related to previous OpenSSL fixes. You will need to upgrade OpenSSL to the latest Slamd64 package (if you've only done a partial upgrade to 11.0 from an older version). Also, the default RSA exponent has been changed from 3 to 35537; any keys generated with an exponent of 3 (the old default) will need to be regenerated to protect against the forging of RRSIGs. http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-4339 *SECURITY FIX* 20061106 With the exception of php5, these updates are in patches/ - Updated php5 to 5.2.0 http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-5465 This is in extra/, not patches/, to avoid automated tools getting confused and updating php4 to php5. There have been some syntax changes: http://www.php.net/UPDATE_5_2.txt *SECURITY FIX* - Updated Mozilla Firefox to version 2.0 - Updated screen to 4.0.3, fixing a UTF8 handling problem http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-4573 *SECURITY FIX* - Patched php4 with a fix for a UTF8 problem http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2006-5465 *SECURITY FIX* 20061025 New packages are in patches/ - Repackaged nfs-utils with various script fixes http://bugs.slamd64.com/show_bug.cgi?id=160 - Repackaged tcpip with fixes for rpc and portmap http://bugs.slamd64.com/show_bug.cgi?id=165 - Updated extra/scripts/mkISO* to put patches/ onto CD3 20061003 Slamd64 11.0 - Added mtools to the floppy package - thanks to Luigi Trovato http://bugs.slamd64.com/show_bug.cgi?id=159 - Updated jre and jdk to 1.5.0.9 - Updated the iso generation scripts in extra/scripts/ 20061001 I've added CHANGES_AND_HINTS.TXT and ANNOUNCE.11_0 files; 11.0 is not released yet, these files are added so that other people can help proofread them and/or translate them in preparation for the release. - Updated the installer in isolinux/initrd.img with various updates from Slackware - a/etc fix: Added missing comment marks (#) for distcc ports in /etc/services - Updated shared-mime-info to 0.19 - Updated openldap-client to 2.3.27 - thanks to Carlos Corbacho for pointing out I'd missed this. http://bugs.slamd64.com/show_bug.cgi?id=139 - Rebuilt imapd and samba against new openldap-client - thanks again to Carlos Corbacho http://bugs.slamd64.com/show_bug.cgi?id=146 - Repackaged xmms to include xmms-config - thanks to Thomas York http://bugs.slamd64.com/show_bug.cgi?id=150 - Patched tar to be less strict about option order - thanks again to Carlos Corbacho http://bugs.slamd64.com/show_bug.cgi?id=141 - Rebuilt popa3d, sendmail, and sendmail-cf to do better checking of passwd and group to avoid adding redundant entries to these files. - l/xaw3d - Added missing Tip.h and TipP.h files, fixed symlinks, and patched a reproducable crash. Thanks to Yair K and Carlos Corbacho http://bugs.slamd64.com/show_bug.cgi?id=147 - Added missing locale files to 32x11 - thanks to Dmitry Koptev http://bugs.slamd64.com/show_bug.cgi?id=152 - Repackaged cdparnoia with gzipped man page, permission fixes, and added missing documentation. Thanks again to Carlos Corbacho. http://bugs.slamd64.com/show_bug.cgi?id=131 - Repackaged dhcp with man page permission fixes. Thanks again to Carlos Corbacho. http://bugs.slamd64.com/show_bug.cgi?id=144 20060930 Sorry for the small amount and delay in these; my desktop's power supply exploded, and the overheating problem in my laptop has appeared to have worsened. - Updated huge26.s, kernel-generic, kernel-modules, kernel-source, kernel-headers, alsa-driver, extra/madwifi to linux-2.6.16.29, and moved UHCI and OHCI drivers in-kernel from modules, allowing you to use a USB keyboard with the installer. - Updated openssl and openssl-solibs to 0.9.8d - *SECURITY FIX* - Updated openssh to 4.4p1 - check permissions of /etc/rc.d/rc.sshd after this update - *SECURITY FIX* - Updated util-linux to 2.12r, with various fixes from Slackware - thanks to Carlos Corbacho http://bugs.slamd64.com/show_bug.cgi?id=143 - Updated libgpod to 0.4.0 - Rebuilt gkrellm with lib64 fixes - thanks to Thomas York and Carlos Corbacho for reporting and fixing this :) http://bugs.slamd64.com/show_bug.cgi?id=151 20060928 Okie, one other mini Q&A session: Q: Why are you slower than $other-slack-derivative that gets updates done within $x hours of Slackware? A: Generally it's because I don't upload stuff without testing it a reasonable (IMO) amount first; occasionally, other reasons such as coursework, work, and holidays apply. - a/etc fixes - csh.login fixes and added distcc to /etc/services - Updated pkgtools - various fixes, including upgradepkg not removing the old package if the new one is corrupted - Updated sysvinit with several fixes from Slackware - Updated vorbis-tools with several fixes from Slackware 20060927 Slamd64 11.0 RC5 (don't ask about RC4... *cough* ;) As I said I would a week ago (20060920), I've create a slamd64-security mailing list - see http://lists.slamd64.com - it's open for subscriptions, however I won't be posting anything to it until after 11.0. - Updated the contents of aaa_base - including version bump :D Includes a /media directory - see /media/README - Rebuilt kdebase with various patches fixing a few issues, including an unneeded (and unwanted) HAL dependency. 20060923 Thanks to Carlos Corbacho for the cleanup bugs (all the updates here with a bugs.slamd64.com reference except for 148/espgs). - Reverted espgs to the older version, due to packaging problems http://bugs.slamd64.com/show_bug.cgi?id=148 - Rebuilt xine-lib against libtheora (You'll also need libtheora to play ogg files, both ogg/vorbis and ogg/theora, due to the ogg demuxer plugin linking against it) - Removed linux-2.6.16.27 from testing/; meant to do this when I added it to slackware/a/, slackware/k/, and kernels/ - Moved php5 from testing/ to extra/ - Added gutenprint-5.0.0 to testing/ - Added hplip 1.6.9 to testing/ - this may replace hpijs in the future, and is the successor to hpoj. - Updated espgs to 8.15.3svn185 again, with cjkv issues fixed - Repackaged sysvinit with the latest scripts from Slackware, including rc.hplip support - Rebuilt cups, because something had randomly broken :P - Repackaged portmap, with rc.rpc replacing rc.portmap - this starts rpc.portmap, rpc.lockd, and rpc.statd, all are requried for NFS, both client and server-side. - Upgraded nail 11.25 to mailx 12.1 - Added ttf-indic-fonts 0.4.7.1 to slackware/x - Added desktop-file-utils 0.11 to slackware/l - Repackaged gnuchess with a gzipped info page http://bugs.slamd64.com/show_bug.cgi?id=126 - Repackaged glib with missing documentation, stripped binaries, and gzipped man and info pages http://bugs.slamd64.com/show_bug.cgi?id=129 - Updated pinentry to 0.7.2 and cleaned up the package http://bugs.slamd64.com/show_bug.cgi?id=130 20060921 More thanks to Carlos Corbacho, for the fixes with a bugs.slamd64.com reference I don't know if libassuan, libksba, libgcrypt, and gpgme are /actually/ all security fixes, however the ChangeLogs are a little bare, and given it's all GnuPG-related, better safe than sorry :) - Added rdesktop 1.5.0 to slackware/n - Updated libwpd to 0.8.6 - Rebuilt openssl and openssl-solibs with a patch for CVE-2006-4339 - *SECURITY FIX* - Updated stunnel to 4.17 - Rebuilt diffutils with manpage fixes - Repackaged sysvinit with a few fixes, including for external hard drives that are mounted on boot - Repackaged udev with dmsetup rules for LVM2 uncommented. - Patched xine-ui so it doesn't block konsole - Updated gzip to 1.3.5, and patched several security problems - *SECURITY FIX* - Added the /usr/bin utilities to libungif - Updated vim and vim-gvim to 7.0.109 - Added neon 0.25.5 to slackware/l - Updated subversion to 1.4.0, and linked against neon - Patched procmail to work properly with > 2GB mailboxes - Updated git to 1.4.2.1 - Updated pkgconfig to 0.21 - Updated espgs to 8.15.3svn185 - Updated libgpg-error to 1.4 - Updated libassuan to 0.9.0, stripped binaries, and gzipped info pages - *SECURITY FIX* http://bugs.slamd64.com/show_bug.cgi?id=125 - Updated libksba to 1.0.0, stripped binaries, and gzipped info pages - *SECURITY FIX* http://bugs.slamd64.com/show_bug.cgi?id=128 - *SECURITY FIX* - Updated libgcrypt to 1.2.3, stripped binaries, and gzipped info pages http://bugs.slamd64.com/show_bug.cgi?id=127 - *SECURITY FIX* - Updated gpgme to 1.0.3, stripped binaries, and gzipped info pages - *SECURITY FIX* http://bugs.slamd64.com/show_bug.cgi?id=124 - Updated gnupg2 to 1.9.22 - *SECURITY FIX* 20060920 Yet again, thanks again to Carlos Corbacho for a fair proportion of these updates :) Now to answer a couple of FAQs: Q: When will Slamd64 11.0 be out? A: Shortly after Slackware 11.0. Q: When will Slackware 11.0 be out? A: No idea :) Q: When will Slamd64 11.0 RC5 be out? A: Once Slamd64-current is up-to-date with Slackware 11.0 RC5. I'm still catching up with updates from my holiday, so that may take a while. Q: What are your plans for updates to 11.0? A: I plan to release security updates for 11.0, at least until the next stable version. It may be for a shorter period of time, a longer period of time, or not at all, depending on how much time it takes, my university work takes, or any jobs take. If you or your company requires some kind of assurance of updates for a longer period of time, please contact me if you can offer financial support for the distribution. I also plan to start a security mailing list, with a post detailing every security update to Slamd64. - Modified module-init-tools so that /etc/modprobe.conf is supported if there's no /etc/modprobe.d/modprobe.conf file. - Removed reiser4progs from slackware/a/ - I think I've left these in for long enough - from 20060614 ChangeLog: "REISER4 IS NO LONGER A SUPPORTED FILESYSTEM IN SLAMD64." - Rebuilt sane with udev support, fixed binary permissions, and man page fixes. http://bugs.slamd64.com/show_bug.cgi?id=119 - Repackaged raidtools with a new port of Slackware's .build script, fixing permissions and man pages. http://bugs.slamd64.com/show_bug.cgi?id=120 - Repackaged gtk+ with permission, man page and info page fixes. http://bugs.slamd64.com/show_bug.cgi?id=121 - Upgraded amarok to 1.4.3, and built against libgpod, libmtp, and libnjb - Repackaged gaim with libdir fixes, and manpage cleanups. http://bugs.slamd64.com/show_bug.cgi?id=122 - Repackaged aalib with permission fixes and gzipped info pages. http://bugs.slamd64.com/show_bug.cgi?id=123 - Updated seamonkey to 1.0.5 - *SECURITY FIX* - Updated mozilla-firefox to 1.5.0.7 - *SECURITY FIX* - Updated mozilla-thunderbird to 1.5.0.7 - *SECURITY FIX* 20060918 Thanks again to Carlos Corbacho for various fixes included in these updates. Also, I'm aware that Slackware's huge26.s kernel has been updates; I won't be upgrading Slamd64's huge26.s until after 11.0 probably, as it's going to be Slamd64's only supported kernel, and I'd rather have a slightly older but more tested kernel for that. - Downgraded imagemagick to 6.2.8_8, fixing display -window root segfaults. http://bugs.slamd64.com/show_bug.cgi?id=113 - Rebuilt pciutils, including types.h http://bugs.slamd64.com/show_bug.cgi?id=115 - Rebuilt tclx with libdir fixes. http://bugs.slamd64.com/show_bug.cgi?id=116 - Added svgalib 1.4.3 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=47 - Added netpbm 10.18.12 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=48 - Rebuilt xfig against netpbm - Added netatalk 2.0.3 to slackware/n/ http://bugs.slamd64.com/show_bug.cgi?id=109 - Repackaged devmapper and lvm2 with stripped binaries, and root:root owned binaries instead of root:bin http://bugs.slamd64.com/show_bug.cgi?id=104 - Added ktorrent 2.0.2 to extra/ - note that differences in extra/ other than out of date versions *are not bugs*, and shouldn't be filed on bugs.slamd64.com - I don't follow Slackware's extra/ at the moment. http://bugs.slamd64.com/show_bug.cgi?id=103 - Rebuilt kdesdk against apr and apu - Updated bind to 9.3.2-P1 - *SECURITY FIX* - Added libgpod 0.3.2 to slackware/l/ - Added libmtp 0.0.18 to slackware/l/ - Added libnjb 2.2.5 to slackware/l/ 20060908 - Updated MySQL to 5.0.24a - Repackaged udev with various script/config changes from Slackware - Updated huge26.s, kernel-modules, kernel-generic, kernel-source, kernel-headers (using new CLFS script) to 2.6.16.28 - thanks to Marek Januszewski and Carlos Corbacho http://bugs.slamd64.com/show_bug.cgi?id=105 http://bugs.slamd64.com/show_bug.cgi?id=108 - Rebuilt alsa-driver against new kernel - Rebuilt libjpeg with libjpeg.so symlink in the right place - thanks to John Gilbert http://bugs.slamd64.com/show_bug.cgi?id=112 - Updated samba to 3.0.23c - Rebuilt the aspell-dict packages in extra/ with the dictionaries in /usr/lib64/aspell - thanks to Yair K. http://bugs.slamd64.com/show_bug.cgi?id=69 - Removed the windows XP compatability patch from dhcp, as it was causing segfaults. Thanks to Stéphane Berthelot http://bugs.slamd64.com/show_bug.cgi?id=78 20060902 Thanks to Carlos Corbacho - Updated xaw3d to 1.5E http://bugs.slamd64.com/show_bug.cgi?id=100 - Rebuilt gv against new xaw3d http://bugs.slamd64.com/show_bug.cgi?id=101 - Added xfm 1.5 to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=102 20060831 - Really fixed gtk+-2 - whoops :) Thanks to various people in #slamd64 for reporting this. - Updated libmusicbrainz to 2.1.4 - Added libvisual 0.4.0 to slackware/l/ - Rebuilt amarok against libvisual and new libmusicbrainz - Updated linux-howtos to 20060829 20060830 - Added seyon 2.20c to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=85 - Fixed a packaging problem which was skipping gtk-2.0-x86_64 from the gtk+2 package. Thanks to Matt Hayes and Dow Jenkinson for reporting this http://bugs.slamd64.com/show_bug.cgi?id=98 20060829 - Rebuilt vim and vim-gvim; from Slackware ChangeLog: "Use the default vanilla system vimrc as distributed with the vim sources. Thanks to J for mentioning that using vim with 'crontab -e' was working fine without any additions to the vimrc." - Updated m4 to 1.4.6 - Added dejavu-ttf 2.9 to slackware/x/ - Patched fontconfig so that dejavu-ttf are the default fonts if they're installed - Rebuilt libpng against libz and libm - Rebuilt xchat with tcl plugin support and libdir fixes - Repackaged irssi removing duplicate documentation files - Rebuild gtk+2 with config files stored in /etc/gtk-2.0-x86_64, and repackaged 32gtk+2 including /etc/gtk-2.0 - this fixes acroread and probably other things. - Thanks to Berend van Wachem for finding this - Added xgames 0.2 to slackware/xap/ 20060825 Sorry for not keeping track with slackware-current, akregator has been marking my slackware-current RSS feed as read for no real reason. - Rebuilt gpm with a patch so that only critical errors go to console, the rest go to syslog - Repackaged udev to check that the kernel version supports it, default loglevel changed to critical, and restored tty group access to ttyUSB devices - Updated vim and vim-gvim to 7.0.066 - Added lm_sensors 2.10.0 to slackware/ap/ - Recompiled kdebase with sensors support - Updated amarok to 1.4.2 - Updated k3b and k3b-i18n to 0.12.17 - Rebuilt pango, fixing the path for the fontconfig dependency in libpangocairo.so - Added pygtk 2.8.6 to extra/ - installing this in addition to c/ and the python package (from d/) is required for the newer cedega "small" GUI packages to work. Obviouslly, if I become less productive in the next few days, it's got nothing to do with cedega working, purely coincidence :P - Updated the gimp to 2.2.13 20060824 More missing packs added, thanks to Carlos Corbacho. - Really updated tcsh - thanks to Allix Davis for catching this - Repackaged seamonkey with libdir fixes - thanks to Matt Hayes http://bugs.slamd64.com/show_bug.cgi?id=71 - Added fvwm 2.4.19 to slackware/xap/, just in case fluxbox or XFCE down your shiny 64-bit system too much. http://bugs.slamd64.com/show_bug.cgi?id=46 - Added xv 3.10a to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=79 - Added p2c 1.21alpha2 to slackware/d/ http://bugs.slamd64.com/attachment.cgi?id=119 - Added xpaint 2.7.0 to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=82 - Updated php5 in testing to php 5.1.6 - From the announcement: "This release contains a fix for memory_limit restriction on 64 bit systems that was not included in PHP 5.1.5." - Thanks to Jakub Jankowski for the heads up. - Rebuilt kernel-headers with the an updated version of CLFS's script, adding quota.h http://bugs.slamd64.com/show_bug.cgi?id=95 - Added windowmaker 0.92.0 to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=51 - Added x3270 3.2.2p1 to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=52 20060822 Thanks again to Carlos Corbacho for missing packages - Patched dhcp to use a 32-bit int for lease time. Some dhcp clients don't understand leases with a 64-bit lease time. Patch based on a freebsd patch. http://bugs.slamd64.com/show_bug.cgi?id=78 - Repackaged lesstif with the config files http://bugs.slamd64.com/show_bug.cgi?id=76 - Added xaw3d 1.5 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=67 - Added xfig 3.2.4 to slackware/t/ http://bugs.slamd64.com/show_bug.cgi?id=81 - Added gv 3.6.1 to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=84 - Added transfig 3.2.4 to slackware/t/ http://bugs.slamd64.com/show_bug.cgi?id=80 - Added blackbox 0.65.0 to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=88 - Repackaged db42 with headers in the correct place http://bugs.slamd64.com/show_bug.cgi?id=87 - Rebuilt tcsh with a patch from slackware to make su work with new $LS_COLORS http://bugs.slamd64.com/show_bug.cgi?id=89 - Added pmake 2.1.35 to slackware/d/ http://bugs.slamd64.com/show_bug.cgi?id=93 20060820 Slamd64 11.0 RC2 - Rebuilt grep staticically, as an ugly kludge to stop it linking against libgcc_s.so - anyone know a better method? http://bugs.slamd64.com/show_bug.cgi?id=21 - Rebuilt libtiff with several vulnerability fixes *SECURITY FIX* - Updated git to 1.4.2 - Rebuilt kdenetwork with a fix for a problem with kopete that can crash KDE - Updated mm to 1.4.2 - Updated pcre to 6.7 - Compressed manpages in slang - Updated php to 4.4.4, fixing several security issues *SECURITY FIX* - Updated php 5 in testing to 5.1.5 *SECURITY FIX* 20060818 - Added autofs 3.1.7 to slackware/n/ - thanks to Carlos Corbacho - http://bugs.slamd64.com/show_bug.cgi?id=73 - Moved the imagemagick .tgz from slackware/ to slackware/xap/ Thanks to Matt Hayes for catching this - Updated mt-st to 0.9b - Fixed various problems in the wireless-tools rc scripts - make sure to merge in /etc/rc.d/rc.wireless.conf.new - Moved man pages in pcmciautils and commented out line for old webgear wireless card - Updated sysvinit and udev with a better fix for rc.optical-symlinks - Repackaged fontconfig into /usr instead of /usr/X11R6, which fixes various lib64, include, libtool, and pkgconfig problems. - Added gd 2.0.33 to slackware/l - Rebuilt gnuplot against gd - Rebuilt kdebase with various patches from slackware 20060817 - Rebuilt gnuchess with patches to fix x86_64 and a generic buffer overflow issue. Thanks to Yair K. http://bugs.slamd64.com/show_bug.cgi?id=68 - Added unifdef 1.0+20030701 to extra/ - this is required to rebuild the new kernel-headers package - thanks to CLFS Headers for their help - Downgraded kernel-headers to 2.6.16.27 - this is the same as the kernels. These are now built using a CLFS script, rather than repackaged from the premade tarballs. Thanks to CLFS for the script and help with getting it working - Added udev style /dev/md/* devices to devs - this should make life easier for people who boot between 2.4 and 2.6 kernels, although 2.4 kernels aren't supported in slamd64. Upgrading this package will not work while udev is running. - Added sysstat 7.0.0 to slackware/ap/ - Updated imagemagick to 6.2.9 - Updated iproute2 to 2.6.16_060323 - Rebuilt pango with xft support - Thanks to Matt Hayes http://bugs.slamd64.com/show_bug.cgi?id=70 - Repackaged glibc and glibc-solibs - I was able to reproduce the problem others were having, and these packages seem to fix the problem http://bugs.slamd64.com/show_bug.cgi?id=9 - not closed this bug yet - Repackaged udev with slackware's recent changes - Repackaged sysvinit with slackware's recent changes - hopefully this will fix problems with /lib/udev/rc.optical-symlinks - Updated nfs-utils to 1.0.10 - Updated genpower to 1.0.5 - Repackaged git replacing hardlinks with softlinks - Updated less to 394 20060815 Slamd64 11.0 RC1 Thanks to Carlos Corbacho again :) - Replaced glibc and glibc-solibs packages with ones that should hopefully fix upgrading problems for more people - Updated udev to 097 - make sure you update rc.udev with rc.udev.new - Updated kernel-headers to 2.6.17.8 http://bugs.slamd64.com/show_bug.cgi?id=44 - Updated kernel-source to 2.6.16.27 - Altered various files in isolinux/ to indicate that huge26.s is "the" slamd64 kernel. - Updated imlib to 1.9.15 - Rebuilt sendmail and sendmail-cf - Updated jre to J2SE 5.0 Release 8 - Updated tcpip - upgraded to ethtool-4 and tftp-0.42 - Moved jdk to extra, and updated to J2SE 5.0 Release 8 - Updated nfs-utils to 1.0.9 - Updated pango to 1.12.3 - Updated linux-faqs and linux-howtos to 20060228 http://bugs.slamd64.com/show_bug.cgi?id=54 - Updated zsh to 4.2.6 - Added jove 4.16.0.61 to slackware/ap/ http://bugs.slamd64.com/show_bug.cgi?id=44 - Added tix 8.1.4 to slackware/tcl/ http://bugs.slamd64.com/show_bug.cgi?id=60 - Rebuilt bsd-games with several amd64 patches http://bugs.slamd64.com/show_bug.cgi?id=61 - Added xfractint 20.2.03 to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=64 - Added nn 6.7.3 to slackware/n/ http://bugs.slamd64.com/show_bug.cgi?id=59 - Added glut 3.7 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=36 - Added ispell 3.2.06 to slackware/ap/ http://bugs.slamd64.com/show_bug.cgi?id=62 - Added trn 3.6 to slackware/n/ http://bugs.slamd64.com/show_bug.cgi?id=63 - Added libwpd 0.8.5 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=32 - Repackaged fontconfig with a fixed .la file - Repackaged espgs without junk in / - Added mpeg_lib 1.3.1 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=33 - Rebuilt librsvg with corrected fontconfig dependency - Added gucharmap 1.4.1 to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=43 - Rebuilt koffice against libwpd - Added xlockmore 5.22 to slackware/xap/ http://bugs.slamd64.com/show_bug.cgi?id=65 20060814 Thanks again to Carlos Corbacho. On 20060723, I said I'd be removing the kernels except for huge26.s - this is going to happen *REALLY* soon. At the moment I'm going to leave the old ones in the isolinux config, but I'm putting the huge26.s modules and so on into slackware/, and putting the old ones into pasture/. If you upgrade to this kernel, make sure you remember to install alsa-driver from slackware/l/ - use of the other kernels is deprecated, and unsupported unless huge26.s doesn't work for you, in which case, please file a bug at http://bugs.slamd64.com with relevant information. - On 20060803 I updated bin and libtiff, but forgot to add them to the changelog - Added alsa-oss 1.0.11 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=27 - Added t1lib 5.1.0 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=49 - Rebuild xpdf against t1lib - Added slacktrack 1.29 to extra/ http://bugs.slamd64.com/show_bug.cgi?id=25 - Updated tetex to 3.0 http://bugs.slamd64.com/show_bug.cgi?id=23 - Added linuxdoc-tools 0.9.21 to slackware/ap/ http://bugs.slamd64.com/show_bug.cgi?id=24 - Repackaged fontconfig with libdir fixes - Added librsvg 2.14.4 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=31 - Added esound 0.2.36 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=34 - Made the initrd bigger, as the small amount of free space was causing problems for some people - Moved kernel-ide from slackware/a/ to pasture/, and moved kernel-generic (2.6.16.27) from testing/ to slackware/a/ - Updated kernel-modules to 2.6.16.27 (huge26.s) from testing/ - old version in pasture/ - Moved alsa-driver 1.0.11_2.6.16.27 to slackware/l/ from testing/ - Repackaged aaa_elflibs without the ncurses 5.5 so libraries - if you've got aaa_elflibs-11.0-x86_64-6.tgz installed, as normal, you're not supposed to upgrade this package. Instead, do: rm /usr/lib64/libncurses*.so.5.5 ldconfig -n /usr/lib64 as root. Otherwise you'll have some "interesting" effects in alsaconf, liloconfig, and other ncurses programs. - Updated slackware/c/, and added 32cairo to it. http://bugs.slamd64.com/show_bug.cgi?id=55 20060812 Thanks to Carlos Corbacho for pointing out most of the added packages, and for patches and SlackBuilds for them. I've merged in Slackware's recent udev, hotplug, and sysvinit changes. udev will now handle device hotplugging on 2.6, however hotplug is still included if for some reason you're running a 2.4 kernel. The old sysvinit, hotplug, and udev packages are in pasture/ - I might revert back to these for 11.0 depending on if I hear of any problems, and how long it is until 11.0 is released. Same goes for X11 MAKE SURE YOU MERGE IN THE .new FILES IN /etc/rc.d BEFORE REBOOTING WITH NEW UDEV/HOTPLUG/SYSVINIT - also, if you've modified /etc/hotplug/blacklist, make sure you port your customisations to /etc/modprobe.d/blacklist MAKE SURE YOU INSTALL l/freetype AND x/fontconfig IF YOU UPGRADE X11 - Updated mm to 1.4.1 - Downgraded cups to 1.1.23 - Rebuilt samba against cups 1.1.23 - Recompiled sendmail with DBROKEN_PTHREAD_SLEEP defined - stops sendmail milters sometimes being unstable. Rebuilt sendmail-cf - Repackaged etc with slackware's latest updates - Removed duplicate /etc/shadow from tcpip - Typo fix in hicolor-icon-theme slack-desc - Rebuilt tcl with the include files included, and /usr/lib/tcl moved to /usr/lib64. http://bugs.slamd64.com/show_bug.cgi?id=22 - Rebuilt tls (for tcl) in extra/amsn/ with libraries in /usr/lib64 - Added sharutils 4.6.3 to slackware/a/ http://bugs.slamd64.com/show_bug.cgi?id=26 - Added startup-notification 0.8 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=35 - Added libcaca 0.9 to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=29 - Added libmikmod 3.1.11a to slackware/l/ http://bugs.slamd64.com/show_bug.cgi?id=30 - Rebuilt xmms with mikmod support - Added bootp 2.4.3 to slackware/n/ http://bugs.slamd64.com/show_bug.cgi?id=37 - Updated whois to 4.7.15 - Added elm 2.5.8 to slackware/n/ http://bugs.slamd64.com/show_bug.cgi?id=38 - Added epic4 2.4 to slackware/n/ http://bugs.slamd64.com/show_bug.cgi?id=39 - Added metamail 2.7 to slackware/n/ http://bugs.slamd64.com/show_bug.cgi?id=40 - Repackaged gimp with manpage symlinks fixed - Updated sysvinit to 2.86 to sort out some x86_64 issues, and merged in Slackware's latest changes - Updated udev to 096, and merged in Slackware's latest changes - Now using Slackware's noarch hotplug package. Hotplug won't run if we're running udev on a 2.6 kernel - Added freetype 2.1.9 to slackware/l/ - Added fontconfig 2.2.3 to slackware/x/ - Rebuilt X11 with slackware's latest changes, including new intel driver support, and split out freetype to slackware/l/ and fontconfig to slackware/x/ - X now depends on these packages. - Rebuilt php with freetype support - Added netpipes 4.2 to slackware/n/ http://bugs.slamd64.com/show_bug.cgi?id=41 - Updated newspost to 2.1.1 http://bugs.slamd64.com/show_bug.cgi?id=42 - Added rdist 6.1.5 to slackware/n/ http://bugs.slamd64.com/show_bug.cgi?id=45 - Added uucp 1.07 to slackware/n/ http://bugs.slamd64.com/show_bug.cgi?id=50 20060811 - Updated pkgtools to 11.0 - Updated gtk+2 to 2.8.20 - Added gnome-icon-theme 2.14.2 to slackware/l/ - Added hicolor-icon-theme 0.9 to slackware/l/ - Added mm-1.4.0 to slackware/l - Rebuilt apache against system mm. Apache now depends on mm from slackware/l - Repackaged php with gettext and mysql extensions enabled in the config again - fixes http://bugs.slamd64.com/show_bug.cgi?id=19 - thanks to "Zeljkoj" for reporting this - Updated sendmail and sendmail-cf to 8.13.8 - Updated lftp to 3.5.4 - Repackaged glibc and glibc-solibs - this should fix some people's problems, but not all - Rebuilt the installer based off slackware-current's. The previous version was based on slackware-current over a year ago. - Updated aaa_elflibs to be in sync with -current (and with a version bump to match) 20060810 - Repackaged coreutils with working dircolors - thanks to various people for reporting this - partially fixes http://bugs.slamd64.com/show_bug.cgi?id=13 and duplicates. You need to logout and login again for bash to work properly again after either this or the previous coreutils updates, otherwise it gets confused about rm, ls and the rest of coreutils moving from /usr/bin to /bin - Rebuilt shadow against new coreutils - fixes su (the other part of bug 13) - Rebuilt ruby against new coreutils - fixes http://bugs.slamd64.com/show_bug.cgi?id=16 Thanks to Allix Davis for reporting this. - Updated cups to 1.2.2 - Updated hdparm to 6.6 - Rebuilt mc with php highlighting fixed and /usr/lib/mc moved to /usr/lib64/mc - Updated samba to 3.0.23b - Rebuild sendmail with two errata patches 20060809 - Updated lesstif to 0.95.0 - Updated man-pages to 2.39 - Updated ncftp to 3.2.0 - Updated mysql to 5.0.24 - Rebuilt grep 2.5 - Updated findutils to 4.2.28 - Updated dnsmasq to 2.33 - Updated curl to 7.15.5 - Updated ntp to 4.2.2p3 - Fixed a fieldwidths bug in gawk - Updated mdadm to 2.5.3 - Repackaged etc with a fix from slackware affecting "su -" - Added pcmciautils 014 to slackware/a/ - Added lftp 3.5.3 to slackware/n/ - Updated popa3d to 1.0.2 - Updated vsftpd to 2.0.5 - Updated imagemagick to 6.2.8_8 - Updated the sane package to include sane-backends 1.0.18 - Rebuild tcpip with new bridge-utils (1.0.6), ethtool (3), netkit-ntalk (0.17 and 0.11, 0.11 better for 8-bit charsets), and vconfig (from vlan 1.9). Fixes http://bugs.slamd64.com/show_bug.cgi?id=4, thanks to Shridhar Daithankar for reporting it. - Added aalib 1.4rc5; fixes http://bugs.slamd64.com/show_bug.cgi?id=7 - thanks to Carlos Corbacho for most of the SlackBuild and the patch. - Rebuilt iproute2 to include tc; fixes http://bugs.slamd64.com/show_bug.cgi?id=10, thanks to "flaq" - Rebuilt coreutils; somewhere along the line, I accidentally removed --bindir=/bin from the SlackBuild, making the binaries go into /usr/bin. This is now fixed, thanks to Matt Hayes for reporting - fixes http://bugs.slamd64.com/show_bug.cgi?id=12 - Rebuilt gdk-pixbuf with the .so image loaders. Thanks to Diogo Siebert for reporting (http://bugs.slamd64.com/show_bug.cgi?id=11) 20060808 I probably won't be merging in Slackware's recent udev and sysvinit updates until after 11.0, because as Slamd64 kernels are all 2.6, this would be a huge change to (almost?) all installs of Slamd64, and in the past, it's taken a while for amd64 udev issues to come to light. I'm also not going to follow the XOrg/freetype separation until after 11, as new X builds on slamd64 seem to take a long time to sort out due to multilib (eg, the current XOrg package is build number 7). - Updated mozilla-firefox to 1.5.0.6 - Updated seamonkey to 1.0.4 - Updated attr to 2.4.32_1 - Updated acl to 2.2.39_1 - Updated pciutils to 2.2.3 - Added sysfsutils 2.0.0 to slackware/a/ - Updated xfsprogs to 2.8.10_1 - Repackaged alsautils with an uncompressed manpage issue fixed - Added dmapi 2.2.5_1 to slackware/ap - Added xfsdump 2.2.38_1 to slackware/ap - Updated links to 2.1pre23 - Updated php to 4.4.3 - Updated libusb to 0.1.12 - Repackaged xchat with some finish translation errors fixed - Updated usbutils to 0.72 - Updated mdadm to 2.5.2 20060803 I'm going to start moving pkgconfig files into /usr/lib64/pkgconfig - please don't post any bug reports on location of pkgconfig files for the moment unless they're somewhere *really* weird. For a start, I'll be doing this as I upgrade packages rather than "all in one go". There should be no problems as at the moment, /usr/lib64/pkgconfig is a symlink to /usr/lib/pkgconfig Thanks to the Mozilla Foundation for permission to use their trademarks in the mozilla-firefox and mozilla-thunderbird packages. Again, any missing packages/problems with packages/any problem with the distribution should be reported on http://bugs.slamd64.com *PLEASE* test that the new glibc and glibc-solib packages: a) work b) can be upgraded from runlevel 1, without needing a reboot Thanks to Carlos Corbacho for a handy script to highlight differences between slackware and slamd64. Is this a new record for longest slamd64 changelog comments? It's at least close with 20060723 :) - Rebuild subversion to link against the correct apr and apr-util so files, thanks to Allix Davis for the report http://bugs.slamd64.com/show_bug.cgi?id=3 - Added slang1-1.4.9 - old slang package renamed to slang1 - Added slang-2.0.6 - Added qca-1.0 and qca-tls-1.0 to slackware/kde/ - thanks to Mandriva for a couple of lib64 patches for qca - Added mozilla-thunderbird 1.5.0.5 - thanks to Matt Hayes, Carlos Corbacho, and Allix Davis for helping me get this right. Just to clarify, if you build thunderbird yourself, unless you've got permission from the Mozilla Foundation, you should remove --enable-official-branding from the .SlackBuild script - Updated autoconf to 2.60 - Fixed a documentation symlink issue in subversion - Repackaged atk with a typo removed from the slack-desc - Updated irssi to 0.8.10a - Updated cvs to 1.11.22 - Updated automake to 1.9.6 - Updated bison to 2.1 - Updated curl to 7.15.4 - Updated dnsmasq 2.32 - Repackaged glibc and glibc-solibs with new doinst.sh scripts that should allow upgradepkg to work correctly, and a new rpcgen that is patched to work properly on lib64 (thanks to Jakob Viketoft). The .so files aren't rebuilt, as I didn't want to try a new glibc build this close to release. - Renamed cxxlibs to use the same version numbering system as slackware; I was using gcc-g++ version, now using the .so version (6.0.3) - Updated dhcp to 3.0.4 - Updated fetchmail to 6.3.4 - Updated iptables to 1.3.5 - Updated gkrellm to 2.2.9 - Updated getmail to 4.6.3 - Updated gdb to 6.5 - Updated hpijs to 2.1.4 - Updated doxygen to 1.4.7 - Updated iproute2 to 2.6.15_060110 - Updated jfsutils to 1.1.11 - Updated gpm to 1.20.1 - Updated groff to 1.19.2 - Updated gettext to 0.15 - Updated gettext-tools to 0.15 - Updated KDE to 3.5.4, arts to 1.5.4, kdevelop to 3.3.4 - These are the same packs I put on the kde.org mirrors, except for kdevelop which I seem to have missed, and kdenetwork which is now patched to work with ICQ again, and jabber should work. - Updated kdei to KDE 3.5.4 and KOffice 1.5.2 - we're now using Slackware's .tgz packs for kdei, as they are really are noarch, and it's pointless making our own versions. - Downgraded lilo to 22.7.1 - Updated gnupg to 1.4.5 *SECURITY FIX* - Updated at to 3.1.10 - Bind recompiled with --enable-threads - Updated libpng to 1.2.12 - Updated gnet to 2.0.7 - Updated cyrus-sasl to 2.1.22, and moved /usr/lib/sasl2 to /usr/lib64/sasl2 - Updated libidn to 0.6.3 - Updated libart_lgpl to 2.3.17 - Updated aspell to 0.60.4 - Updated the devs package (same as slackware-current again) - Updated libidl to 0.8.6 - Updated libieee1284 to 0.2.10 - Updated fribidi to 0.10.7 - Fixed isolinux/isolinux.cfg to have the ramdisk size in ramdisk_size for huge26.s, instead of some random number - Updated libogg to 1.1.3 - Updated libvorbis to 1.1.2 - Updated libtool to 1.5.22 - Updated libwmf and libwmf-docs to 0.2.8.4 - Updated links to 2.1pre22 - Updated man to 1.6c - Updated libxml2 to 2.6.26 - Updated libxslt to 1.1.17 - Updated mc to 4.6.1 - Updated mdadm to 2.5.1 - Updated mhash to 0.9.7 - Updated module-init-tools to 3.2.2 - Updated most to 4.10.2 - Updated mutt to 1.4.2.2i - Updated nasm to 0.98.30 - Updated nail to 11.25 - Updated ncftp to 3.1.9 - updated nmap to 4.11 - Updated ntp to 4.2.2 - Updated pidentd to 3.0.19 - Updated popa3d to 1.0.1 - Updated openldap-client to 2.3.24 - Updated pango to 1.10.4 - Updated procmail to 3.22 - Updated pkgconfig to 0.20 - Updated readline to 5.1 - Updated rzip to 2.1 - Updated sed to 4.1.5 - Updated ppp to 2.4.4 - Updated strace to 4.5.14 - Updated vsftpd to 2.0.4 - Updated whois to 4.7.11 - Updated xsane to 0.991 - Updated ytalk to 3.3.0 - Updated xscreensaver to 5.00 - Added extra/scripts/mkMini.iso - this will give you a ~ 25MB iso image, with the slamd64 kernels and the normal installer initrd, but no packages. Handy for installing from nfs, or if you've broken your system and need a 64-bit livecd to poke it a little. 20060801 Yesterday I added gxine, and forgot to put it in the changelog. Thanks to Matt Hayes - Really updated procps to 3.2.7 - thanks to Marin Mitov and Allix Davis for catching this. - Rebuilt seamonkey - thanks to Matt Hayes sfor pointing out that the package was broken - Downgraded MySQL to 5.0.22 as 5.0.23 was never officially released due to bugs - Rebuilt vim and vim-gvim - upgraded to ctags-5.6 - Updated jed to 0.99.18 - Rebuilt samba with some doc symlink fixes, and with usr/lib/samba moved to /usr/lib64/samba - turns out that --with-fhs makes it ignore --libdir, so there's a one-line patch to the configure script to fix this. - Added oprofile-0.9.1 to slackware/d/ - Updated slackware/a/bin to 11.0 - same versions in this package as in slackware 20060731 - Added wv2 - I'd compiled and packaged this a while ago, but apparantly forgotten to include it in the distribution. Thanks to Marin Mitov for pointing this out. - Updated libstdc++.so.6.0.3 in cxxlibs to the version from gcc-g++ 3.4.6 - thanks to "regis" for noticing this - Updated the libraries in aaa_elflibs, and bumped the version to 11.0.0 - remember that this package should never be removed or upgraded - Updated xine-lib to 1.1.2 - Added apr and apr-util 1.2.7 to slackware/l/ - Updated subversion to 1.3.2, and switched to using external apr and apr-util - Updated mysql to 5.0.23 - Updated madwifi to 0.9.2 (this is built against the testing 2.6.16.27 kernel/huge26.s) - Rebuilt k3b (in extra/), and added k3b-i18n - Updated bind to 9.3.2 and enabled threading support - Updated imagemagick to 6.2.8_7 - Updated procps to 3.2.7 - Added mozilla-firefox 1.5.0.5, as I've received permission from the Mozilla Foundation. There's a few packaging issues with my thunderbird build I hope to sort out shortly. If you use the firefox build script here, you *MUST* remove --enable-official-branding unless you have permission from the Mozilla Foundation. Thanks to amigo linux for the build script. 20060730 - Rebuilt huge26.s and testing/packages/linux-2.6.16.27/kernel-generic with 32-bit emulation support. Oops. - Updated apache to 1.3.37 - *SECURITY FIX* - Updated mod_ssl to 2.8.28_1.3.37 - *SECURITY FIX* 20060729 - I must subconsciously hate lilo. Hopefully I've remembered to upload it today, thanks to Allix Davis for pointing it out. - Updated seamonkey to 1.0.3 20060728 - *Really* updated lilo to 22.7.2.1 - an upstream problem made it so the patch wasn't applied - Updated fluxbox to 1.0rc2 - Rebuilt ruby with --enable-shared and --enable-install-docs - Rebuilt sdl without an arts dependency - thanks to "shared" from #slamd64 - Updated xchat to 2.6.6 - Repackaged sysvinit with new rc files from slackware - Updated koffice and kdei/koffice*.tgz to 1.5.2 - Rebuilt RPM with a lib64 patch - HUGE thanks go to Carlos Corbacho for making the patch 20060727 NEW PLACE FOR BUG REPORTS - http://bugs.slamd64.com Thanks to Allix for pointing out a few packages that I was behind on updating. - Updated lilo to 22.7.2.1 - Updated dhcpcd to 2.0.4 - pid/config directory has been moved back to /etc/dhcpc, as it has in slackware. - Updated git to 1.4.1.1 - Updated joe to 3.5 - Updated m4 to 1.4.5 - Updated samba to 3.0.23a - Updated imagemagick to 6.2.8-4, and added a libpng patch from frugalware - thanks to frugalware for the patch, and various people in #slamd64 for pointing it out. - Added ruby 1.8.4 - thanks to fedora for patches, and thanks to Carlos Corbacho for finding the patches - Updated vim to 7.0.042, removed xvim, and added vim-gvim; this depends on vim, and there's no shared files between these packs. - Updated the gimp to 2.2.12 - Updated gnupg to 1.4.4 - Updated libassuan to 0.6.10 - this is a dependency of gnupg2 - Updated libksba to 0.9.15 - also a gnupg2 dependency - Updated gnupg2 to 1.9.21 - this isn't in Slackware, however it's needed for PGP/MIME support in some mail clients. I'd prefer to be using the distribution's builds for my day-to-day use so I'm more likely to find bugs in the distribution, so in a few places I add features I need. - Updated fluxbox to 1.0rc - Updated libmusicbrainz to 2.1.3 - Rebuilt libtunepimp with a patch for CVE-2006-3600 - Updated amarok to 1.4.1 - Updated mercurial to 0.9.1 - Added clisp-2.39 - I'm guessing that this was missing due to compatability issues in the past, however this version "just works" - Updated sdl to 1.2.11 - Replaced the mozilla suite with seamonkey 1.0.2 - Rebuilt python, merged python-demo and python-tools into the main python package to keep in line with slackware. - Updated xfce to 4.2.3.2 - Updated sox to 12.18.1 - Updated udev's config files to have slackware's new ones. Slackware is still using udev 071, however we're using 072 as 071 has x86_64 compatability issues (in particular, no sound devices). 20060723 I've swapped gnugs back to espgs (which is what slackware uses) as I've been using it for a good few months now, and I've heard of no problems, so I'm assuming it's fixed. I've added slackware-style 2.6.16.27 huge26.s into kernels/, and related packages into testing/packages/linux-2.6.16.27/ - the config are the same as their slackware counterparts except for architecture options, and the future domain scsi controller has been set as a module in huge26.s, as it causes a panic on amd64. huge26.s has been added to the isolinux boot menu. *PLEASE* test this kernel, as it's hopefully shortly going to be the only one. - Moved gnugs from slackware/ap to pasture/ - Moved espgs from testing/ to slackware/ap/ - Added 2.6.16.27 huge26.s to kernels/ - Added kernel-generic-2.6.16.27 to testing/packages/linux-2.6.16.27/ - Added kernel-modules-2.6.16.27 to testing/packages/linux-2.6.16.27/ - Added alsa-driver-1.0.11_2.6.16.27 to testing/packages/linux-2.6.16.27/ - Updated atk to 1.10.3 - Updated glib2 to 2.10.3 - Updated gtk+2 to 2.8.19 - Updated libglade to 2.5.1 - Updated libgtkhtml to 2.6.3 20060707 - Updated k3b to 0.12.16 - Updated xfsprogs to 2.7.11 and split out acl and attr - Added attr-2.4.28 to slackware/a/ - Added acl-2.2.34 to slackware/a/ - Updated apache to 1.3.36 - Updated mod_ssl to 2.8.27-1.3.36 - Updated man-pages to 2.33 - Updated quota to 3.13 - Updated sendmail to 8.13.7 - *SECURITY FIX* - Updated imagemagick to 6.2.8 - Updated xchat to 2.6.4 - Updated coreutils to 5.97 - Rebuilt kdebase with several patches from slackware/kde-security - *SECURITY FIX* 20060617 - Added n/netcat 1.10 - Added n/yptools 2.9 - Thanks to Jakob Viketoft - Updated extra/kiptablesgenerator to 1.3.1 (a new version will be out shortly though) - Rebuilt KDE without NVidia libGL.la compile-time dependency 20060616 - Repackaged glibc and glibc-solibs with some symlink fixes - please don't compile anything against yesterday's KDE packages as they are dependent on the nvidia drivers; this will be fixed shortly, along with updated koffice and kdei packages. - *SECOND UPDATES OF THE DAY* - Repackaged glibc and glibc-solibs with a better fix for ld-linux-x86-64.so.2 - upgrading to this in runlevel 1 WorksForMe(tm) - if it doesn't for you, please try upgradepkg --reinstall on the same .tgz files from a boot cd. 20060614 - Repackaged libpng; now shouldn't have problems with it looking in /usr/lib - Upgraded to glibc 2.3.6 - The installer now has XFS support. This is untested - feedback welcome - Updated arts to 1.5.3 - Updated KDE to 3.5.3 - Updated gcc to 3.4.6 - SUPPORT FOR COMPILATION OF 32-BIT PROGRAMS HAS BEEN REMOVED. You are still able to run 32-bit programs via the libraries in slackware/c/; the recommended way to compile 32-bit binaries is to install slackware in a chroot. - Upgraded kernels to 2.6.16.20 - THESE NO LONGER INCLUDE REISER4 SUPPORT! DO NOT UPGRADE TO THESE KERNELS IF YOU ARE USING REISER4! This is because all my reiser4 systems have had corruptions, as have a fair proportion of other people's that I know of. REISER4 IS NO LONGER A SUPPORTED FILESYSTEM IN SLAMD64. - Updated amarok to 1.4.0a 20060611 Sorry for the delay - this is mainly due to my university exams. Larger updates will be coming shortly - Added libstdc++.so.5 to a/cxxlibs package - Same for 32base - Reverted ncurses, pkgtools, and alsa-utils as the new ncurses creates major problems with the nvidia driver installer. This will be looked into. - Updated kernel-headers to include files from CLFS's 2.6.16.20-06092006 tarball - Rebuilt libmusicbrainz and libtunepimp - Repackaged libmad with a pkgconfig file - thanks to Carlos Corbacho - Updated xine-lib to 1.1.1 - Updated amarok to 1.4.0 20060522 Turns out that some things (eg dialog and alsamixer) needed recompiling after the recent ncurses upgrade. If I've missed something, please post it on http://forums.slamd64.com I'll be posting an update on the fundraiser shortly. Sorry for the delay, this was due to exams and illness. - Updated binutils to 2.16.92 with a patch from the Cross-Linux- From-Scratch Project; new version and patch work better with multilib x86_64 systems. - Updated kernel-headers to 2.16.16 and now using multilib headers from CLFS project - Rebuilt pkgtools (specifically dialog) against new ncurses - Rebuilt alsa-utils against new ncurses - Upgraded bash to 3.1.017 - Updated vim to 7.0.017 - Updated xvim to 7.0.17 - Updated openssl and openssl-solibs to 0.9.8b - Updated openssh to 4.3p2 20060511 - Upgraded to smartmontools-5.36 - THIS WILL NOT WORK WITH SATA DRIVES ON SLAMD64-CURRENT DEFAULT KERNELS - I'll upgrade the kernel as soon as I've got time - Updated libpng to 1.2.10 - Updated rsync to 2.6.8 - Updated tcl to 8.4.13 - Updated tk to 8.4.13 - Rebuilt extra/tls against new tcl - Updated extra/amsn to 0.95 - Updated extra/madwifi to current CVS - Added bash-completion 20060301 - Updated cdrdao to 1.2.1 - Updated mysql to 5.0.21 - *SECURITY FIX* - Updated gmp to 4.2.1 - Added l/mpfr 2.2.0p10 - Updated apache to 1.3.35 - *SECURITY FIX* - Updated mod_ssl to 2.8.26_1.3.35 - Updated gnupg to 1.4.3 - Rebuilt php against new apache, updated to Mail-1.1.10 and XML_RPC-1.4.8 PEAR modules, added /usr/bin/php-cgi - Moved k3b from slackware/kde to extra/ to be more in-line with slackware - Added php-5.1.4 to testing/ - Updated ncurses to 5.5 and hopefully sorted out terminfo colour problems - Updated espgs to 8.15.2 and moved it from pasture/ to testing/ This is an intended replacement for gnugs - please test and post on the forums your experience with this as a *replacement* for gnugs (aka don't have both installed at once) 20060504 - Rebuilt libexif without junk empty extra .so file - Rebuilt libgtk+2 with libgtk-x11 :) - Really added libgsf 20060503 - Rebuilt X11 with libfreetype in the correct place - Added libgsf 1.14.0 - Recompiled libmusicbrainz without gcc_s_32 dependency - thanks to various people on #slamd64 on freenode for the fix - Ditto for libtunepimp - Updated koffice and kdei/koffice* to 1.5.0 - Updated k3b to 0.12.15 - Updated alsa-lib to 0.10.11 - Updated gimp to 2.2.11 - Updated nmap to 4.03 - Updated proftpd to 1.3.0 - Updated tin to 1.8.2 - Updated wireless-tools to wireless_tools.28 - Updated slocate to 3.1 - Updated stunnel to 4.15 and moved the libraries from /usr/lib to /usr/lib64 - Updated a/gettext and d/gettext-tools to 0.14.5 and more lib -> lib64 fixes - Recompiled ppp with lib -> lib64 fixes - Updated alsa-utils to 1.0.11 - Updated mysql to 5.0.20a - Updated guile to 1.8.0 - Updated libungif to 4.1.4 - Updated imagemagick to 6.2.7 - Updated glib2 to 2.8.6 - Updated pango to 1.10.4 - Added cairo 1.0.4 - Updated gtk+2 to 2.6.10 - Updated libexif to 0.6.13 20060411 Just to clarify: if you're using an automated tool such as swaret or slapt-get to keep up-to-date with -current, these tools are unsupported and will occasionally break parts of your system. For example, after the 20060328 updates, PHP gained a dependency on openldap-client which was mentioned here, but I got several reports of PHP being broken by users of such tools which didn't install openldap-client (a new package). If you are using an automated tool, please check the changelog to see if there's any relevant notes (for example, KDE's libdir moving from /opt/kde/lib to /opt/kde/lib64), and check MANIFEST.bz2 for files which seem to be missing before reporting bugs. Please also make sure you have the latest versions of relevant packages. -current is likely to break anyway from time to time, but more so if you're not using the latest version of all the packages. aaa_elflibs and other packages which state they should not be upgraded are exceptions. Also, if you've symlinked to workaround X problems, please can you remove the symlinks and see if they're fixed. Thanks. - Removed 32devel as it's basically useless and interferes with build systems when compiling 64-bit applications. - 32-bit compatability packages remade to reduce compilation problems, and to increase versions to versions in slackware-current. There should now generally not be problems compiling programs which vanish when these packages are not installed. - Updated make to 3.81 - Updated subversion to 1.3.1 - Repackaged x11 with missing .pc files; thanks to everyone who reported this - Updated xscreensaver to 4.24 - Recompiled kdeartwork against xscreensaver - Updated python to 2.4.3 - Updated rp-pppoe to 3.8 - note I don't have the ability to test this package, so fixes are /much/ more useful than bug reports ;) - Updated rsync to 2.6.7 - if this is broken, the rest of these updates are probably too ;) - Updated samba to 3.0.22 - Updated vim and xvim to 6.4.010 - Updated mysql to 5.0.19 - Updated curl to 7.15.3 - Updated openldap-client to 2.3.20 20060405 - Really upgraded kdevelop to 3.3.2 - Repackaged X11 with correct .la files - Rebuilt imageMagick with correct dependency paths in .la files - Rebuilt irssi against new perl (oops) - Rebuilt xmms without libGL.la/freetype.la problems - Added libmusicbrainz-2.1.2 to l/ - Added libtunepimp-0.4.2 to l/ - Added amarok-1.3.9 to kde/ - KDE and XMMS rebuilt without incorrect libfreetype path in .la files and without libGL.la - kdemultimedia no longer has xine dependency, but now some parts such as juk depend on libmusicbrainz and libtunepimp - arts is now in l/ (as it is in slackware-current) - Corrected dates from this year's part of the changelog to say 2006 instead of 2005.. um yeah.. oops. 20060329 - Rebuilt X11 (had compiled it with the nvidia drivers installed) 20060328 - Updated proftpd to 1.3.0rc4 - Updated xscreensaver to 4.23 - this should fix problems people were having with tests working but not the actual screensaver - Updated imagemagick to 6.2.6-1 - Updated sane to sane-backends-1.0.17 and sane-frontends-1.0.14 - Rebuilt python against db-4.2.52, and made it live in lib64 - Rebuilt python-{demo,tools}, and made -tools live in lib64 - Updated perl to 5.8.8 and moved stuff to /usr/lib64/python2.4; thanks to suse for handy patches and hints in the .spec - Updated xchat to 2.6.1, and /I think/ the TCL, Python, and Perl plugins now all work. - Rebuilt gawk with patch from Slackware to fix "free(): invalid pointer" problems - Updated dvd+rw-tools from 5.21.4.10.8 (right......) to 6.1 - Updated tin to 1.8.1 - Repackaged fetchmail with python files in new place - Updated getmail to 4.4.4 and moved the python files - Updated libxml2 to 2.6.23 and moved the python files - Rebiult libxslt with python files in the new place - Updated MySQL to MySQL 5.0.18 - Rebuilt php against new MySQL - Rebuilt perl against new MySQL (yes, this is two perl updates in one day's changlog...) - Removed BitchX as it's broken - Rebuilt Qt against new MySQL - Updated arts to 1.5.2, KDE to 3.5.2 and kdevelop to 3.3.2 - note that KDE now uses /opt/kde/lib64 - Rebuilt koffice with libs in /opt/kde/lib64 - Rebuilt k3b with libs in /opt/kde/lib64 - Removed mozilla-{firefox,thunderbird} (hopefully temporarily) due to new uncertainties on trademark licensing issues 20060326 - Updated openssl to 0.9.8a - Updated openssh to 4.3p1 - Updated cups to 1.1.23 - Recompiled kdelibs against new openssl (even though KDE 3.5.2 is expected out tomorrow...) - Removed db3 - Added db44 package (Berkely DB 4.4.20) - Renamed db4 package to db42 and upgraded to 4.2.52 - Updated sudo to 1.6.8p12 - fixes an issue where Python scripts executed via sudo may gain root access (CVE-2006-0151) - *SECURITY FIX* - Updated sendmail to 8.13.6 - fixes CVE-2006-0058 - *SECURITY FIX* - also linked against db-4.4, so as for Slackware, any databases in /etc/mail will have to be rebuilt ( cd /etc/mail; rm *.db; make ) - Updated fetchmail to 6.3.2 - fixes CVE-2005-3088, CVE-2005-4348, CVE-2006-0321. *SECURITY FIX* - Added GNU libidn 0.5.17 to slackware/l/ - Rebuilt X11 packs fixing "would-only-run-as-root" problem and CVE-2006-0745 - *SECURITY FIX* - Rebuilt apache against db-4.4 - Updated php to 4.4.2, and added db-4.4 and LDAP support. Complete with the regular 100KB/2421 line to the build system due to hardcoded /usr/lib paths for dependency checking... 20060325 - Updated mozilla-firefox to 1.5.0.1 - *SECURITY FIX* - Updated mozilla-thunderbird to 1.5 - Removed slackware/z/ and source/z/ due to recent changes in European intellectual property legislation 20060316 Sorry for the delay again, been a bit busy - Updated fluxbox to 0.9.14 - Downgraded udev to 072 due to various problems with 081 - Updated gimp to 2.2.10 - Repackaged pan with better permissions in the .SlackBuild and a fixed .desktop file - Recompiled xpdf with fixes for recent potential security issues - Updated Qt to 3.3.5 - Updated arts to 1.5.1 - Updated kde to 3.5.1 - kdemultimedia/artsd mp3 playback problems fixed - Updated kdevelop to 3.3.1 - Updated kdei to 3.5.1 - Updated koffice to 1.4.2 - Updated koffice l10n packs to 1.4.2 - Updated k3b to 0.12.14 20060125 - Upgraded kernels to 2.6.14.6; reason for this is it's the latest kernel which doesn't require udev; it looks likely that this will be the last kernel package in Slamd64 where udev is optional. The kernels have been changed: There's now only bare.i, sata.s, scsi.s and raid.s; scsi.s and raid.s should cover systems that previously used adaptec.s or 3ware.s, and raid.s now has software raid support. sata.i has been removed as the old sata interface has been deprecated for a long time. - Updated kernel-modules, kernel-ide, kernel-source to 2.6.14.6 - Updated kernel-headers to 2.6.12.0 - Updated udev to 081 - Rebuilt SDL with a gentoo patch to get tile-blitting support on AMD64 - thanks to Carlos Corbacho for pointing this out - Rebuilt libdb4 with fast mutexes - thanks again to Carlos Corbacho - Rebuilt python against new libdb4 - Downgraded arts to 1.4.2 due to stability issues - Repackaged x11-devel due to a few path problems - Updated k3b to 0.12.10 20060117 - Updated X11 to 6.9.0 - Added libwmf 0.2.8.3 20060108 Happy new year all, sorry for the delay. - Updated Pine and Imapd to 4.64 - Updated tcpdump to 3.9.4 - Updated apache to 1.3.34 - Updated lynx to 2.8.5rel.5 - Updated libxml2 to 2.6.22 - Updated expat to 1.95.8 - Updated PHP to 4.4.1 - Updated wget to 1.10.2 - Updated openssl and openssl-solibs to 0.9.7g - Rebuilt openssh against new openssl - Patched curl against a buffer overflow - Updated dnsmasq to 2.24 - Patched bash not to hang when starting a new shell - Updated mod_ssl to 2.8.25, and rebuilt against apache 1.3.34 20051213 - Patched bug in a/bash where first process in new shell could hang - Updated a/bzip2 to 1.0.3, and patched a bug in handling of large files 20051212 - Fixed errors in /etc/profile (slackware/a/etc) - thanks to en1gma for pointing out the error 20051206 - Finally finished getting KDE upgraded to 3.5.0 - Also updated kdei 20051204 - Updated gettext and gettext-tools to 0.14.3 (and the gettext package now actually contains gettext...) - Updated Qt to 3.3.4 - Updated kde/arts to 1.5.0 20051201 - Repackaged XOrg to have -fPIC libraries - Recompiled wireless-tools with -fPIC 20051116 - Updated python, python-demo, python-tools to 2.4.2 20051102 Sorry about the delay since the last update; this is due to a mix of flu, start of university, coursework and other issues. - Altered /etc/profile in slackware/a/etc so that "_POSIX2_VERSION=199209"; this will make "tail -$NUMBER" work again, instead of requiring "tail -n $NUMBER" - Updated samba to 3.0.20b due to reported x86_64 bugs - bsdgames now includes wtf - Added iptraf to slackware/n/ - Updated KDE to 3.4.3 20051004 - Fixed l/ so that it doesn't ask for libgcrypt if expert/menu selected 20051003 - Updated mozilla-firefox to 1.0.7 - Updated mozilla to 1.7.12 - Done a possible fix to the initrd for mkswap problems - please tell me if this fixes it. 20050922 - Added pcmcia-cs; thanks to everyone who reminded me 20050921 - Updated various libraries in aaa_elflibs; thanks to "Higuita" for pointing these out. 20050918 - Fixed ext? installs (missing library on initrd) - thanks to Bonzodog for heads up - Some incorrect directory placements in e2fsprogs fixed - thanks to pcxz for heads up - Removed duplicate entries for libgcrypt in slackware/l/maketag - thanks to Lasse Collin for heads up 20050915 Slamd64 10.2 - Updated k3b to 0.12.4a - Updated dnsmasq to 2.23 - Updated nmap to 3.93 - Altered the initrd - /bin/sh -> /bin/bash - installer segfault fix - Minor modifications to extra/scripts/mk* 20050913 - Upgraded xchat to 2.4.5 - xpdf has missing Bulgarian.nameToUnicode - Updated sane backends to 1.0.16 - Upgraded xsane to 0.97 - Upgraded libvorbis to 1.1.1 - Upgraded libxml2 to 2.6.21 - Upgraded libxslt to 1.1.15 - Patched a security flaw in dhcpcd where an attacker on the same network can cause dhcpcd to crash - CAN-2005-1848 - Upgraded pcre to 6.4 - Upgraded sox to 12.17.8 - Upgraded vorbis-tools to 1.1.1 - Patched dcron so it won't improperly fork itself in some circumstances - Updated glib and pcre in aaa_elflibs - 32gtk+2 updated to 2.6.10 and now includes glib2 - 32base updated to aaa_elflibs-10.2.0-i486-3, cxxlibs-5.0.7-i486-1, glibc-solibs-2.3.5-i486-5.tgz, zlib-1.2.3-i486-1 - Updated 32devel to glibc-2.3.5-i486-5 - Updated 32pango to pango-1.8.2-i486-1 20050911 Slamd64 10.1 RC2 - Fixed various -fPIC issues in XOrg - thanks to fedora for the patch - Updated nmap to 3.90 - wgetrc now wgetrc.new to stop clobbering existing config file - Upgraded SDL to 1.2.9, with SDL-image-1.2.4, SDL_mixer-1.2.6, and SDL_ttf-2.0.7 - Updated pango to 1.8.2 - Updated glib2 to 2.6.6 - Updated gtk+2 to 2.6.10 - Updated vim, xvim to patchlevel 86, and ctags to 5.5.4 20050910 The _real_ Slamd64 10.2 RC1 :P - Shuffled stuff around as disk 2 isos were too big - This included moving JDK from extra/ to slackware/d/ 20050909 Slamd64 10.2 RC 1 - Updated gawk to 3.1.5 - Fixed minor syntax error in hotplug - Upgraded dialog version in pkgtools so install-packages scripts work - Updated reiserfsprogs to 3.6.19 - Updated utempter to 1.1.3 - Updated groff to 1.19.1 with a patch to fix tmp file security problem with groffer - Updated zsh to 4.2.5 - Updated libtool to 1.5.20 - Updated subversion to 1.2.3, moved to d/, and switched to Slackware's build script - Fixed a security problem in kcheckpass, part of kdebase - Added jre 1_5_0_04 to l/, moved d/j2sdk to extra/jdk and updated to 1_5_0_04 - Updated dhcp to 3.0.3 - Fixed symlinks in /sbin in iproute2 pack - Updated mod_ssl to 2.8.24 - Updated openssh to 4.2p1 - Rebuilt PHP with --with-dom - Updated ppp to 2.4.4b1 - Updated rp-pppoe to 3.6 - Rebuilt tcpip with a new patch for telnet - Updated wget to 1.10.1 - Fixed a lib64 issue with aaa_base - Updated xpdf to 3.01 20050902 - Gaim had a library in the wrong place 20050901 - Liloconfig had i386 archtype so wouldn't find kernel if you forgot to copy to /boot - updated jfsutils to 1.1.8 - updated procps to 3.2.6 - updated mysql to 4.1.14 - updated pcre to 6.3 - updated gaim to 1.5.0 - updated samba to 3.0.20 - added XML_RPC to php's pear - updated pci.ids in pciutils - Missed some device files from the initrd - thanks to fuzzbawl for pointing this out - libjpeg recompiled with -fPIC 20050816 - extra/scripts/mkISO{2,2.us,4,4.us} - made seperate ISOs for US users, which don't include z/ 20050815 - Rebuilt kdeedu fixing http://www.kde.org/info/security/advisory-20050815-1.txt - Added packages into contrib: - ap/slapt-get-0.9.10b-x86_64-1.tgz - xap/gslapt-0.3.5-x86_64-1.tgz 20050812 - Updated gFTP to 2.0.18 due to 2.0.18-rc1 not permitting chmod on directory. Thanks to "cRoW2k" for heads up. - Added packages into contrib: - kde/knemo-0.3.1-x86_64-1.tgz - l/libast-0.6.1-x86_64-1.tgz - l/imlib2-1.2.1-x86_64-1.tgz - xap/Eterm-0.9.3-x86_64-1.tgz 20050809 - Added contrib/ directory - this is _UNSUPPORTED_ software from http://contrib.slamd64.com - it is not included on CDs, but is on DVDs and the FTP. - Added packages into contrib: - a/ntfsprogs-1.10.0-x86_64-1.tgz - ap/parted-1.6.23-x86_64-1.tgz - ap/xdelta-1.1.3-x86_64-1.tgz - l/gtkspell-2.0.11-x86_64-1.tgz - l/libreiserfs-0.3.0.5-x86_64-1.tgz - l/libsamplerate-0.1.2-x86_64-1.tgz - xap/logjam-4.4.1-x86_64-1.tgz - xap/sylpheed-2.0.0-x86_64-1.tgz - xap/qtparted-0.4.4-x86_64-1.tgz - xap/xmms-alarm-0.3.6-x86_64-1.tgz - xap/xmms-crossfade-0.3.8-x86_64-1.tgz - With the exception of contrib/, unless there's a catastrophic bug, slamd64-current is now frozen in preparation for a 10.2 release. 20050808 - Repackaged cxxlibs without libstdc++.so.5.0.3, as it creates serious stability and linker problems with nvidia drivers. - Updated kernels to 2.6.12.4, and updated extra/madwifi to be built against 2.6.12.4 - updated kernel-ide, kernel-modules, kernel-source, kernels/, and isolinux/message.txt - Updated aaa_base and isolinux/message.txt to have 10.2 as version number, and various references in initrd - Fixed broken slackware/kdei/maketag files 20050807 - Repackaged extra/keychain with updated keychain.sh in profile.d - Updated cxxlibs to libstdc++.so.6.0.3 from gcc-3.4.4, and added libstdc++.so.5 for backwards-compatability. 20050806 - Updated extra/madwifi to latest CVS and rebuilt against 2.6.12.2 - Updated extra/subversion to 1.2.1 - Updated extra/bluetooth/bluez-{libs,utils} to 1.28 - Updated extra/keychain to 2.5.5 - Added a README file with list of where to get help 20050805 - Added missing files in raidtools pack - thanks to "sfxdana" for pointing this out. - Patched sdl-config to give correct rpath - thanks to Dimitri for pointing this out. - Repackaged sysvinit to make sure all swap files are activated on 2.6 kernels - Recompiled xmms to fix an alsa-pause bug - Updated links to 2.1pre18 - Updated taglib to 1.4 and put pkgconfig files in correct place - Updated e2fsprogs to 1.38 and put pkgconfig files in correct place - Repackaged xfsprogs with good doinst.sh; thanks to Alex Dubov for pointing this out 20050804 - Rebuild kdegraphics with kpdf (oops...) - Added xfsprogs 2.6.13 to slackware/a/ - Added lesstif-0.94.4 to slackware/l/ - Added xpdf-3.00 to slackware/xap - Repackaged mozilla-thunderbird to fix doinst.sh issues - Repackaged lesstif with X11/config in usr/X11R6/lib instead of usr/X11R6/lib64 - thanks to Matt Hayes 20050803 - Patched an attachment-handling bug in KMail - Fixed library symlinks in samba - Rebuilt kdebase with samba support - Added fribidi-0.10.5 into slackware/l/ - Added lcms-1.14 into slackware/l - Rebuilt kdegraphics with ksvg (depends on fribidi and lcms) - Rebuild proftpd with --enable-ctrls --enable-ipv6, and added mod_ctrls_admin_module 20050802 - Updated sysvinit to build 55, fixing some problems with new inet1 format - Updated doxygen to 1.4.4 - Fixed mozilla-thunderbird; it can now send email :) Thanks to Jason Woodward 20050801 - Updated iptables to 1.3.3 - Updated rsync to 2.6.6 - Updated k3b to 0.12.3 - Updated xine-lib to 1.1.0 (both xap/ and z/) - Updated xine-ui to 0.99.4 - Had accidentally removed pinentry when upgrading pine, added again 20050731 - Updated vim to patchlevel 085 - Added xvim 085 - Rebuilt distcc with --without-gnome --with-gtk - Updated guile to 1.6.7 - Updated links to 2.1pre17 - Updated pine and imapd to 4.63 - Updated tcpip - rc.inet1 now supports aliases - Updated pkgtools - toggling of rc.dnsmasq and rc.saslauthd fixed in setup.services - Updated etc to 5.1-noarch-10 - Firmware directory in hotplug changed to /lib/firmware - Updated joe to 3.3 20050729 - Recompiled glibc - fixed symlink for ld-linux-x86-64.so.2 - Hopefully fixed the installer issues (initrd.img) 20050728 - Recompiled glibc - forgot linuxthreads version - Fixed Firefox's doinst.sh - Updated KDE to 3.4.2 (kdevelop 3.2.2) - Fixed slack-desc files for koffice-l10n 20050726 - Repackaged sysvinit to include slackware-current's recent changes 20050725 - Updated udev to 064 - Repackaged hotplug with slackware-current's recent changes, including changed rc.inet1 file - Repackaged tcpip with slackware-current's recent changes, including changed rc.inet1 file - Updated wireless-tools to .27, and merged slackware-current's configuration changes - Updated iproute2 to iproute2-2.6.11-050330 - Now that slackware-current has cyrus-sasl, I've moved it into n/ to match, and replaced it with an equivalent package to the one in slackware-current - Updated libxml2 to 2.6.20 - Updated pkgtools to match slackware-current (added saslauthd and dnsmasq to the services setup menu) - Updated sendmail and sendmail-cf to 8.13.4, and added SASL support - Updated koffice to 1.4.1 - Updated nail to 11.24 - Updated ppp to 2.4.3 - Added devmapper 1.01.03 and lvm2 2.01.13 - Repackaged reiser4progs with correct sbindir - Shuffled around mkISO3 and mkISO4 so all disks are < 700MB (again...) - Updated c/ to have latest packages from slackware-current - Repackaged flac fixing linking errors with xmms - thanks to Kuril - Repackaged xmms with flac support 20050723 - Updated fluxbox to 0.9.13 - Updated zlib to 1.2.3 - Updated mozilla 1.7.10 - Updated mysql to 4.1.13 - Updated mozilla-thunderbird to 1.0.6 - Updated fetchmail to 6.2.5.2 - Alsa-utils now loads oss compat on both 2.4 and 2.6 kernels - Rebuilt MySQL with -fPIC 20050722 - Repackaged python, libxml2, and libxslt to use correct libdirs for various parts of python - Repackaged libxml2 and libxslt because I missed a few files in my repackaging earlier today - Repackaged glibc to fix logging in NIS - thanks to slackware-current. These packs can cleanly be 'upgradepkg'-ed in runlevel 1. 20050721 - Updated xchat to 2.4.4 and linked against new perl - Updated getmail to 4.3.11 - Updated udev to 0.58 - also fixed cd/dvd links - Thanks to Lukasz Stelmac/Patrick Volkerding - Updated tcl to 8.4.11 - Updated tk to 8.4.11 - Added expect 5.43 - Added hfsutils 3.2.6 - Added tclx 8.3.5 - Repackaged mysql so that libmyclient is now in the correct place 20050720 - Rebuilt mysql to have libraries in the proper places - Updated php to 4.4.0 and fixed several problems with php.ini - Fixed libtool to be happy with lib64 - Added gnuchess 5.07 - Updated fluxbox to 0.9.12 - Updated xfce to 4.2.2 - Updated gcc to 3.4.4 - Added libidl 0.8.5 - Updated mozilla-firefox to 1.0.6 20050719 - Updated samba to 3.0.14a - Remade kernel-source package with valid timestamps - Updated ImageMagick to 6.2.3_3 - Patched zlib to fix an overflow, and replaced zlib in initrd - Updated libexif to 0.6.12 - Added gimp-help - Updated sudo to 1.6.8p9 - Updated gtk+2 to 2.6.8 - Updated popa3d to 1.0 - Updated glib2 to 2.6.5 - Added n/bitchx-1.1 0 - thanks to the gentoo project for patches 20050718 - Added reiser4 support - new initrd, kernels, and added reiser4progs. - rebuilt perl-5.8.7 with proper timestamps - Updated sane to 1.0.15 - Rebuilt irssi against perl 5.8.7 - Fixed mkdosfs in bin/ 20050716 - Updated kdei/ to KDE 3.4.1 and KOffice 1.4.0 - Updated kernels to 2.6.12.2 and added raid.s - Removed akregator - in kdepim now - Rebuilt the initrd with most apps replaced by their non-busybox counterparts - Updated pkgtools to 10.2.0 - Updated perl to perl 5.8.7, DBD-mysql 3.0002, and DBI-1.48 - Updated mysql to 4.1.12 - Updated vsftpd to 2.0.3 - Added n/traceroute-1.4a12 - Updated tcpdump to 3.9.3 and libpcap to 0.9.3 - Updated iptables to 1.3.2 - Updated gkrellm to 2.2.7 - Updated gimp to 2.2.8 20050715 - Added mozilla-firefox 1.0.5 to xap/ - thanks to Jaos aka woodwardj/malloc - Added mozilla 1.7.8 to xap/ - thanks to Matt Hayes - Added mozilla-thunderbird 1.0.5 to xap/ - thanks to Larhzu - Added rp-pppoe 3.5 to n/ - Added lynx 2.8.5 to n/ - thanks to Matt Hayes - Updated k3b to 0.12.2 - Updated kdetoys, kdeedu, kdegraphics, kdesdk, kdeaddons, kdewebdev, kdepim to 3.4.1 - Updated kdevelop to 3.2.1 - Updated koffice to 1.4.0b 20050714 - Added RPM 4.2.1 - Updated kdebindings, kdebase, kdeaccessibility, kdeutils, kdemultimedia, kdenetwork, kdeartwork, kdegames to 3.4.1 - Added emacs - thanks to Larhzu - Added fakedestdir into extra/scripts required by emacs.SlackBuild - Moved nonus/ to z/ as required by DVD installs - Added mkDVD to extra/scripts - Modified mkISO* to not contain isolinux/ on every disk (only disk 1 bootable now), and have < 700mb isos (sorry about disk 3 in 10.1) 20050712 - Downgraded openssl to 0.9.7e - Fixed libraries not being installed on some systems - Fixed KDE not being installed on some systems - Upgraded arts and kdelibs to versions from KDE 3.4.1 20050705 - Updated subversion to 1.2.0 - Hopefully fixed libsmbclient in samba 20050623 - Updated module-init-tools to 3.1 - Updated openssl to 0.9.7g - Updated tcsh to 6.14.00 - Updated alsa-lib to 1.0.9 - Updated alsa-utils to 1.0.9a - Updated flac to 1.1.2 - Added mdadm 1.8.0 - Updated mysql to 4.0.24, and fixed mysql_config - Added quota 3.12 - Updated perl to 5.8.6 and fixed mysql support 20050620 - Updated hdparm to 6.1 - Glibc now supports both NPTL and LinuxThreads; export LD_ASSUME_KERNEL=2.4.1 to use LinuxThreads instead of NPTL 20050618 - Fixed python zlib and ncurses support 20050608 - Added missing files into d/guile - thanks to Robert Komar for pointing this out 20050604 - Fixed missing libGL.so problem with X11 (didn't notice because problem doesn't exist when using NVidia's binary drivers) - Forgot to put my fixed wireless-tools (*.so* missing) package into the tree, done 20050603 - Fixed typos in isolinux/isolinux.cfg - Fixed the "Comment" on /opt/kde/share/wallpapers/Slamd64.png (kdebase) so the desktop settings applet doesn't call it "Created with The GIMP" - Gave the linux32 package a less lazy .SlackBuild, and removed the "/install/slackdesc" file (oops) 20050602 - tcl package fixed so symlinks are created in /usr/lib64 rather than dead symlinks in /usr/lib - k3b package fixed so does not depend on libsamplerate - slackware/ap/maketag{,.ez} fixed so installer handles gnugs package correctly - slackware/{a,k}/maketag{,.ez} now contains correct kernel version number - Added testing/glibc-nptl - PLEASE READ THE README - Had put source/ directory for kiptablesgenerator into extra/, but no package. Fixed. 20050520 - Switched to 64-bit initrd - Updated kernel-source package - Using new GPG-KEY 20050519 - Switched kernel-headers package to use linux-libc-headers; this should fix most of the byteorder.h problems. - Upgraded kernels, kernel-modules, kernel-ide to 2.6.11.10 due to security flaws in earlier versions, and NVidia binary drivers now work correctly on recent kernels. - Added 3ware.s kernel supporting 3ware SCSI and SATA RAID controllers - Upgraded kde/k3b to 0.11.24 - Updated extra/madwifi and rebuilt with 2.6.11.10 - Fixed "bc -l" segfault; thanks to Nozomu Muto for pointing this out - Fixed kdelibs SMB issues 20050511 - Fixed various problems with a/bin - dosfstools now work (mkfs,fsck), as does zoo and compress - Added n/portmap - Added n/nfs-utils - Fixed xap/xmms plugins at last! - Updated kde/k3b to 0.11.23 - Added n/dhcp 20050507 - Replaced espgs with gnu ghostscript to fix cups problems 20050412 - Kernels and kernel-modules altered so that ehci-hcd (USB 2 support) is a module than in-kernel to fix problems with USB keyboards - rc.modules in kernel-modules altered to auto-load ehci-hcd, and agpgart commented out 20050405 - Moved KDE to disk 2, added mkISO* in extra/scripts/ 20050403 - Added gammu in extra/ 20050402 - Fixed bluez-libs, bluez-utils, openobex, kdebluetooth (all in extra/) - Removed lame as sox dependency - Added /usr/lib64/qt/lib64 symlink to /usr/lib64/qt/lib - Ditto for /opt/kde/lib64 20050328 - Fixed glib package to include shared libaries. Needed $ARCH of *-linux-gnu instead of *-linux - Same problem with GTK1 - Fixed missing plugins issues with XMMS (apart from mp3s - any ideas?) - Tidied up 32x11: - moved all libs to /usr/lib - removed /usr/bin/freetype-config - this should be from the x11 package - Fixed uname bug in coreutils - uname -a now shows processor information instead of "unknown unknown" - Rebuilt kernels, including slackware/a/kernel-ide*.tgz - Remade kernel-modules package, and modified rc.modules.new to not load ide-scsi. 20050307 - Replaced GTK1 with -fPIC version 20050306 - fixed rogue /usr/lib64/pkgconfig issues with X 20050304 - fixed Xorg lib64/X11 issue 20050302 - upgraded Xorg to 6.8.2 - Recompiled kdelibs, pango, imagemagick, xinelib so that freetype references in .la files are correct 20050227 - fixed kernels to include ISO9660 and UDF support - added new kernels to isolinux.cfg - fixed x11-devel 20050226 - shadow modified to have MD5 passwords enabled by default - packaged kernels for new prelease - added dvd+rw-tools - added linux32 20050224 - kdebase modified to have slamd64 wallpaper as default 20050223 - Upgraded gimp to 2.2.4 20050214 - PHP package now has working mysql support - hpijs package fixed so foomatic cups backend is in lib64 not lib 20050212 - Added keychain from the Gentoo project into extra/ - Had compiled sata_nv as a module in sata.10, fixed - Added ppp to n/ - *UNTESTED* - Modified all kernels to have compiled in USB HCD support 20050210 - Fixed db4 package - now compiled with -fPIC 20050209 - Created sata.10 kernel - Added amsn and tls in extra/ 20050208 - Recompiled Qt properly for /usr/lib64 - Created bare.i, sata.i, and sata.s kernels 20050205 - Fixed kdelibs ssl problems - Made all of c/ installed by default 20050130 - Upgraded gftp to 2.0.18rc1 - segfaults on amd64 fixed - Removed F from isolinux/setpkg - fixes extra disk request - Upgraded udev to 050 - fixes misc problems 20050129 - Fixed 32pango package to work properly :) 20050126 - Recompiled kdemultimedia with kio_audiocd - Fixed iptables (/usr/lib64 issue) - Added xsane - Added libglade - Added xscreensaver - Added XFCE 20050125 - Oops, forgot to include gdb package... - Oops, forgot to include ccache package... - Added new stuff in kdei to tagfile/maketag/maketag.ez 20050124 - Updated GnuPG2 to 1.9.15 so that gpg-agent will actually cache passphrases 20050123 - Fixed Qt path in /etc/ld.so.conf - Fixed X anti-aliasing issues - Fixed rogue symlinks in / issues (x11 and 32x11 problems) vim: ts=2